3 Tips for Making Your Best Fudge (2024)

Listen to This Article:

Loading the Elevenlabs Text to Speech AudioNative Player…

What’s not to love about fudge? It melts in your mouth, coating your tongue in rich and creamy sweetness.

However, making meltaway fudge isn’t always easy! If you don’t understand the proper techniques, you may end up with a grainy or crumbly rather than creamy confection.

If you want to get a better hold on making fudge, join us as we dive into some of the culinary science that pastry arts students can explore during their time at Escoffier.

How to Make Fudge

The simplest fudge recipes start with three ingredients found in many types of confections: sugar, butter, and milk. However, some recipes contain variations on these ingredients, like swapping sweetened condensed milk for the milk and sugar, or semi-sweet chocolate chips for some of the sugar.

Many types of fudge also contain additional ingredients like chocolate, vanilla, or maple syrup, as well as mix-ins such as nuts and marshmallows.

No matter the exact ingredients you use, the fudge-making process will be similar. First, you’ll heat the ingredients to dissolve the sugar and create a hom*ogenous mixture. Next, you’ll cook the mixture until it thickens. Finally, you’ll remove the fudge from the heat, allow it to cool, and then mix thoroughly.

Tips for Making Fudge

Smooth, creamy, and decadent fudge relies on proper technique, so keep these tips in mind when whipping up your next batch.

1. Monitor the Temperature with a Candy Thermometer

If you end up with soft fudge that turns into a puddle in your hands or hard fudge that is a bit reminiscent of a crunchy candy, improper temperature is likely to blame. If you don’t heat your fudge to a high enough temperature, you’ll end up with a soft product. And if you heat the mixture too much, your fudge may be harder than you’d like.

When you’re cooking your fudge over the stove, you should aim for a maximum temperature between 234-237ºF. Yes, that’s only a three-degree range! In order to ensure you remove your fudge from the heat as soon as it reaches this temperature, you should monitor the mixture with a candy thermometer.

2. Avoid Stirring Once the Mixture Comes to a Simmer

Another key part of a successful fudge texture is when you stir the mixture. Stirring the sugar and milk during the initial stages of cooking allows the sugar to dissolve. However, once the mixture comes to a boil, it’s time to put the spoon down.

If you continue stirring once the mixture is simmering, you are encouraging the development of sugar crystals. While crystallization is the goal if you’re making hard candy, crunchy sugar bits can quickly ruin a fudge’s silky smooth texture.

3. Beat Thoroughly

While you shouldn’t mix the fudge mixture when it’s hot, you should beat the mixture once it has been removed from the heat and cooled.

Once again, turn to your candy thermometer. When the mixture has cooled to 110ºF (but not a moment before), it’s time to pick up a wooden spoon and begin stirring. Continue mixing the fudge until it has lost most of its sheen, about 5–10 minutes.

If you mix the fudge when it’s too hot, the sugar particles may lump together and form discernable crystals. Therefore, monitoring the temperature is key!

3 Tips for Making Your Best Fudge (1)

Proper technique is an essential part of creating silky smooth fudge.

Chocolate Fudge Recipe

Keep the previous fudge tips in mind as you follow this recipe for chocolate fudge.

Ingredients

  • 28 oz granulated sugar
  • 12 oz whole milk
  • 6 oz corn syrup
  • 4 oz butter
  • 5 oz unsweetened chocolate
  • ¼ tsp salt
  • 1 tbsp vanilla

Directions

  1. Prepare an 8×8 pan by lining it with butter-coated parchment paper or aluminum foil.
  2. Place the sugar, milk, and corn syrup in a medium saucepan and stir well. Once the mixture begins to boil, stop stirring. Monitor the mixture and watch for it to reach 230ºF.
  3. Add the butter, chocolate, salt, and vanilla and bring the temperature up to 235ºF. Remove from heat.
  4. Once the mixture has cooled to 110ºF, mix it with a wooden spoon until it loses the majority of its sheen.
  5. Pour the mixture into the prepared pan and let it cool fully before slicing.

Continue Improving Your Pastry Skills

Now that you know some of the tips for making fudge, it’s time to think about what other confections and baked goods you’d like to create! Whether you want to make a chewy yet tender loaf of bread or decorate a cake with smooth fondant and intricately piped roses, understanding the technique behind successful dishes is key.

Pastry school can introduce you to both the science and art involved in creating some of your favorite sweet treats and savory baked goods. By working with talented chef instructors, you can explore inside tricks and tips and receive individualized feedback as you practice creating new dishes.

By the time students graduate from , many find they are ready to move toward career goals like starting a bakery or beginning a career as a cake decorator. If you’d like to take the next step to accomplish your pastry dreams, contact us for more information.

To learn more about baking & pastry, check these out next:

  • Cake Decorating Tips: How to Choose the Right Pastry Bag
  • What Is It Like to Be a Pastry Chef?
  • 6 Advanced Baking Techniques Every Pastry Chef Should Know

This article was originally published on December 25, 2016, and has since been updated.

*Information may not reflect every student’s experience. Results and outcomes may be based on several factors such as geographical region or previous experience.

3 Tips for Making Your Best Fudge (2024)

FAQs

3 Tips for Making Your Best Fudge? ›

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

Why is my 3 ingredient fudge not setting? ›

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

What is the key to successful non grainy fudge? ›

The key to successful, nongrainy fudge is in the cooling, not the cooking. The recipe calls for heating the ingredients to the soft-ball stage, or 234° F, then allowing it to cool undisturbed to approximately 110° F.

What makes fudge smooth? ›

For first-time candy makers: Look for recipes that call for corn syrup, marshmallows, or marshmallow crème. These ingredients prevent crystallization of sugar into large grains, so the texture of the fudge will remain smooth. Also, recipes using cream or condensed milk are less likely to curdle than regular milk.

How to make fudge creamy and not grainy? ›

By cooling the fudge prior to agitation (like in the recipes included in this article), on the other hand, you'll get much smaller, finer sugar crystals and a finished fudge with a smooth, creamy texture. Cool the mixture until it reads 120° F on the thermometer—no stirring. This can take 1 to 1/2 hours.

Why is my fudge not hard enough? ›

The amount of time you cook fudge directly affects its firmness. Too little time and the water won't evaporate, causing the fudge to be soft. Conversely, cook it too long and fudge won't contain enough water, making it hard with a dry, crumbly texture.

How do you beat fudge? ›

Beat the mixture

After letting the fudge cool, it's time to beat it. It is important to stir constantly with a wooden spoon until the mixture starts to thicken and its surface starts to look dull or matte. Now is the time to stop beating and pour the fudge into a mould.

Why is my sugar not melting in my fudge? ›

It might be that you haven't dissolved all the sugar before boiling the fudge mixture. It could be that there just wasn't enough fluid or fat to enable the sugar to dissolve or it might even be that the fudge wasn't beaten long enough or hard enough.

How to make fudge firmer? ›

​Harden the fudge:​ Place your container or tins in the fridge for 2 hours, which is the time it takes for the fudge to set. Once it's hardened, cut the fudge into 12 pieces or remove it from the muffin tins. Store in the fridge or the freezer (if you don't devour it right away).

What makes fudge crumbly? ›

Beating the mixture encourages the formation of small sugar crystals, which leads to the crumbly texture. The crystals may not be noticeable in themselves but the fudge mixture will thicken and turn from shiny to matte in appearance.

How do you make fudge less chewy? ›

Chewy fudge is often the result of undercooking. To fix it, you can reheat the fudge mixture over low heat and continue cooking until it reaches the proper temperature. Be sure to use a candy thermometer to monitor the temperature accurately.

How do you get fudge to soft-ball stage? ›

The soft ball stage is the point when melted sugar is 236 degrees. Without a candy thermometer, you can achieve this with what is called a “cold water method”. Fill a small glass with ice and cover it with water until it is ice cold.. Drop your hot sugar syrup into the ice water.

What not to do when making fudge? ›

7 Common Mistakes to Avoid for Candy Shop-Worthy Fudge and Caramels
  1. Using the Wrong Pan. All candy and confections start by melting sugar. ...
  2. Stirring the Sugar. ...
  3. Not Using a Candy Thermometer. ...
  4. Leaving Out the Parchment Paper Lining. ...
  5. Skipping the Cooking Spray. ...
  6. Scraping the Pot. ...
  7. Using a Cold Knife to Slice.
Dec 16, 2015

Do you stir fudge when it's boiling? ›

Avoid Stirring Once the Mixture Comes to a Simmer

Another key part of a successful fudge texture is when you stir the mixture. Stirring the sugar and milk during the initial stages of cooking allows the sugar to dissolve. However, once the mixture comes to a boil, it's time to put the spoon down.

What is the best pan to make fudge in? ›

Secondly, the pot's material should allow for good heat distribution hence your top choice should be copper cookware or a pot with a copper core. Copper's exceptional heat conductivity offers unparalleled temperature control, an asset when working with finicky ingredients like sugar.

What does cream of tartar do in fudge? ›

Cream of tartar is used in caramel sauces and fudge to help prevent the sugar from crystallizing while cooking. It also prevents cooling sugars from forming brittle crystals, this is why it's the secret ingredient in snickerdoodles!

How do you cut fudge so it doesn't crumble? ›

Put both knives into a large measuring cup, add boiling water onto the knives, and before cutting the chocolate or the dessert into pieces, wipe the knife with a towel. The warm knife will easily cut through without cracking.

Why does my fudge crumble when I cut it? ›

The ingredients for fudge are combined and cooked to 234 degrees, cooled to 110 degrees without stirring, then beaten until creamy. Candy that isn't cooked long enough will end up too soft; overcooking makes fudge crumbly or hard.

Top Articles
Latest Posts
Article information

Author: Greg Kuvalis

Last Updated:

Views: 5629

Rating: 4.4 / 5 (55 voted)

Reviews: 86% of readers found this page helpful

Author information

Name: Greg Kuvalis

Birthday: 1996-12-20

Address: 53157 Trantow Inlet, Townemouth, FL 92564-0267

Phone: +68218650356656

Job: IT Representative

Hobby: Knitting, Amateur radio, Skiing, Running, Mountain biking, Slacklining, Electronics

Introduction: My name is Greg Kuvalis, I am a witty, spotless, beautiful, charming, delightful, thankful, beautiful person who loves writing and wants to share my knowledge and understanding with you.