FAQs
To adjust your cameras motion detection settings, from the Home Screen, tap the More button located at the bottom-right corner of the device thumbnail, then select Device Settings > Motion Settings. System is disarmed. Motion detection is on. Motion detection is off.
Should my Blink camera be armed or disarmed? ›
Armed Mode actively monitors for motion, recording video clips, and sending notifications. In Disarmed Mode, motion detection is turned off, and the cameras do not record motion-triggered events, ensuring privacy.
What is armed and disarmed? ›
The difference between Armed and Disarmed is that various intrusion zones can trigger an alarm while the system is in an Armed state, but not in a Disarmed state. Only 24-Hour Zones are capable of triggering an alarm on a Disarmed security system.
Why is my Blink camera not detecting motion? ›
One of the most common reasons for Blink camera motion detection issues is leaving it disarmed. By default, a Blink camera device is set to "Disarmed", which means it is in inactive mode and is not recording motion. Arming your camera activates its motion detection system and event recording feature.
How do I know if someone is watching on the Blink camera? ›
Blink cameras have an activity indicator in the form of a blue color LED light on the front of the camera.
Does Blink still record when disarmed? ›
Disarming your system
When your system is disarmed, your cameras will not record motion events or send motion notifications to your mobile device. To disarm your system: Tap Disarmed at the bottom of the home screen. A confirmation message will appear once the system is disarmed.
Do I have to arm all of my Blink cameras at once? ›
You can Arm and disarm cameras as a group or as a single, it is just a different setup.
What is motion detection on Blink? ›
Blink's feature-rich system includes a motion detector; when armed, any detected motion triggers the recording of a short video clip. Quickly receive a push notification alert with a link to the video attached, so you can decide how to respond. Easily access on-demand video streaming through the Blink app.
How far away can Blink detect motion? ›
Blink cameras use either Passive Infrared (PIR) or Pixel Difference Analysis (PDA) to detect motion. Both technologies provide similar motion detection. Blink cameras detect motion best from about 7 to 19 feet (2m to 6m) away, and can respond to motion at 30 feet (10m).
How to get Blink cameras to record? ›
Turning the Video Recording setting Off or On
Follow these steps to turn the setting off or on. On your doorbell's thumbnail, tap More and select Device Settings . Tap Privacy Settings. Tap the Video Recording toggle to switch your doorbell's ability to record video On or Off.
On your camera's thumbnail, tap More . This menu displays whether Motion Detection is on or off. If Motion Detection is off, tap the Motion Detection button to turn it on. You can also check your camera's Device Settings > Motion Settings to see if Motion Detection is turned on .
Do Blink cameras only record when motion is detected? ›
A: Blink is a motion based camera system. It records clip up to 60s, then pauses for ten or more seconds, then looks for movement again. So at most you end up with a video record with many gaps. If you need continuous recording for your application you should look elsewhere.
How do I increase motion detection on my Blink camera? ›
Adjust the sensitivity level
You can find this setting under Device Settings > Motion Settings in the Blink app. The higher the level, the more sensitive the sensor is, and the more likely it will detect motion. However, it may also pick up irrelevant movements, such as leaves, insects, or reflections.
Can someone else look at my Blink camera? ›
Anyone signed in to your Blink account can view and fully manage your Blink devices and account. Install the Blink app on your additional phone or mobile device. Log in with your existing Blink app account email and password.
Can someone get into my Blink camera? ›
Anyone with your login credentials can get right of entry to your cameras. Never proportion your Blink account password with others. Use a robust, particular password that includes a combination of letters, numbers and logos to make it more difficult to bet.
Does the blue light on the camera mean someone is watching? ›
Does the blue light on the camera mean someone is watching? No, the most common use case for a blue light on a camera is to indicate normal operation. Besides signaling the normal working of a camera, blue light can also signal perfect network connection or active monitoring.
Can I set Blink to arm when I leave? ›
Locate your home on the map when you configure it, and this Applet will arm your Blink System when you leave.
How to get rid of background noise on Blink camera? ›
To avoid feedback, ensure that your mobile device accessing the Blink app is at least 10 feet away from your Blink camera. To stop existing feedback or unwanted noise, tap the Mute icon to silence the camera's speaker. You can also stop the Live View session or switch out of the Blink app entirely.
How to make a Blink camera more sensitive? ›
The sensitivity level determines how much heat change the sensor needs to detect before triggering the camera. You can find this setting under Device Settings > Motion Settings in the Blink app. The higher the level, the more sensitive the sensor is, and the more likely it will detect motion.