Int/Ext
Int
Coverage - Low
250 sq. ft.
Mils Wet
6.4
Mils Dry
2.4
Coverage High
400 sq. ft.
Mils Wet
4.0
Mils Dry
1.5
Finish @ 60°
45-55
Viscosity
95 - 105 KU
Dry To Touch
See AlsoHow To Stain Wood Furniture Without Sanding Or Stripping (4 Easy Steps)What Happens If You Use Too Much Wood Stain?How Many Coats of Deck Stain to ApplyStormstain1 hour
Dry To Recoat
2 hours
VOC
< 100 g/L
Brush
Nylon / Polyester
High Quality Mini Roller
1/4" - 3/8" nap
Spray Tip
.009" - .015"
Spray Filter
60 mesh
Flashpoint
N/A
*Numbers given here are from Base 1.
SURFACE PREPARATION
- All surfaces must be clean and free of dust, chalk, oil, grease, wax, polish, mold and mildew stains, loose and peeling paint, rust, and all other foreign substances.
- A coat of Primer should be applied on uncoated surfaces prior to top coating with Joanna's Trim, Door +Cabinetry Paint.
- On previously painted surfaces, sand the surface thoroughly before topcoating with Joanna's Trim, Door +Cabinetry Paint.
- Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity.
- Use product when the surface and air temperatures are between 50-90°F.
- Airless Spray: .009" to .017" tip with 60 mesh filter
- Brush: Use a high quality Nylon/Polyester brush
- Certain colors may require additional coats for complete hide.
- If using a sprayer and thinning is required, thin with water at a rate of no more than 8 oz. per gallon.
- DO NOT USE ON FLOORS.
PRIMER
- New wood or previously painted surfaces use a product such as KILZ RESTORATION® Interior Water-Based PrimerNo. L2002.
- For hard-to-adhere surfaces such as vinyl, PVC, chalkypaints, glass, fiberglass, metals and engineered wood, use KILZ ADHESION Primer No. L2111.
DRY TIME
- Dries to touch in 1 hour; recoat after 2hours.
- Longer dry time required in cooler temperatures and higher humidity.
- Wait at least 7 days before rinsing or cleaning the surface with a mild, non-abrasive detergent.
CLEAN UP
Clean all tools and equipment with water. For disposal of empty containers and unused product, contact your household refuse collection service.
*LIFETIME LIMITED WARRANTY
Masterchem Industries LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Masterchem Industries LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. For warranty service, call: 1-866-774-6371, or email: techservice@masterchem.com. Masterchem Industries LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
†WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. Contact the National Lead Information Center at 1-800-424-LEAD or visit www.epa.gov/lead.
WARNING! This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm.
CAUTION! IRRITANT! HARMFUL IF SWALLOWED. MAY CAUSE EYE, NOSE AND THROAT IRRITATION. AVOID CONTACT WITH SKIN AND EYES AND AVOID BREATHING OF VAPORS AND SPRAY MIST. WEAR EYE PROTECTION AND PROTECTIVE CLOTHING. USE ONLY WITH ADEQUATE VENTILATION. To avoid breathing vapors and spray mist, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches or dizziness, increase fresh air. If properly used, a respirator (NIOSH approved for organic vapor with P series particulate pre-filter) may offer additional protection; obtain professional advice before using. A dust mask does not provide protection against vapors. Avoid contact with eyes and skin. Wash thoroughly after handling. Close container after each use.
FIRST AID: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately. In case of eye contact, flush immediately with plenty of water for at least 15 minutes and get medical attention; for skin, wash thoroughly with soap and water. If swallowed, get medical attention immediately.
CAUTION: KEEP OUT OF REACH OF CHILDREN – DO NOT TAKE INTERNALLY.
Int/Ext
Int
Coverage - Film thickness depends on porosity of surface and various substrate irregularities.
Up to 400 sq. ft.
Mils Wet
4.0
Mils Dry
1.5
Finish @ 60° Sheen level depends on porosity of surface and various surface irregularities.
15 - 25
Viscosity
95 - 105 KU
Dry Time @77 F and 50% RH: To Touch
1 hour
Dry Time @77 F and 50% RH: To Recoat
2 hours
VOC
< 50 g/L
High quality 100% Nylon or Nylon/Polyester Blend
Nylon / Polyester
High Quality Mini Roller
1/4" - 3/8" nap
Spray Tip
.009" - .015"
Spray Filter
60 mesh
PSI: Fluid pressure
1,500 - 2,200
Wet film thickness
3 - 4 mils
*Numbers given here are from Base 1.
SURFACE PREPARATION
- All surfaces must be clean and free of dust, chalk, oil, grease, wax, polish, mold and mildew stains, loose and peeling paint, rust, and all other foreign substances.
- A coat of Primer should be applied on uncoated surfaces prior to top coating with Joanna's Trim, Door +Cabinetry Paint.
- On previously painted surfaces, sand the surface thoroughly before topcoating with Joanna's Trim, Door +Cabinetry Paint.
- Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity.
- Use product when the surface and air temperatures are between 50-90°F.
- Airless Spray: .009" to .017" tip with 60 mesh filter
- Brush: Use a high quality Nylon/Polyester brush
- Certain colors may require additional coats for complete hide.
- If using a sprayer and thinning is required, thin with water at a rate of no more than 8 oz. per gallon.
- DO NOT USE ON FLOORS.
PRIMER
- New wood or previously painted surfaces use a product such as KILZ RESTORATION Interior Water-Based PrimerNo. L2002.
- For hard-to-adhere surfaces such as vinyl, PVC, chalkypaints, glass, fiberglass, metals and engineered wood, use KILZ ADHESION Primer No. L2111.
DRY TIME
- Dries to touch in 1 hour; recoat after 2hours.
- Longer dry time required in cooler temperatures and higher humidity.
- Wait at least 7 days before rinsing or cleaning the surface with a mild, non-abrasive detergent.
CLEAN UP
Clean all tools and equipment with water. For disposal of empty containers and unused product, contact your household refuse collection service.
*LIFETIME LIMITED WARRANTY
Masterchem Industries LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL DIRECTIONS. This warranty is not transferable. If this product is found not to perform as specified on the label during the warranty period, Masterchem Industries LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. For warranty service, call: 1-866-774-6371, or email: techservice@masterchem.com. Masterchem Industries LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
†WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. Contact the National Lead Information Center at 1-800-424-LEAD or visit www.epa.gov/lead.
WARNING! This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm.
CAUTION! IRRITANT! HARMFUL IF SWALLOWED. MAY CAUSE EYE, NOSE AND THROAT IRRITATION. AVOID CONTACT WITH SKIN AND EYES AND AVOID BREATHING OF VAPORS AND SPRAY MIST. WEAR EYE PROTECTION AND PROTECTIVE CLOTHING. USE ONLY WITH ADEQUATE VENTILATION. To avoid breathing vapors and spray mist, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches or dizziness, increase fresh air. If properly used, a respirator (NIOSH approved for organic vapor with P series particulate pre-filter) may offer additional protection; obtain professional advice before using. A dust mask does not provide protection against vapors. Avoid contact with eyes and skin. Wash thoroughly after handling. Close container after each use.
FIRST AID: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately. In case of eye contact, flush immediately with plenty of water for at least 15 minutes and get medical attention; for skin, wash thoroughly with soap and water. If swallowed, get medical attention immediately.
CAUTION: KEEP OUT OF REACH OF CHILDREN – DO NOT TAKE INTERNALLY.
