How should I clean my Diamonique jewellery? – QVC Customer Care (2024)

FAQs

How do you clean diamonique? ›

We recommend you clean your Diamonique jewellery simply by using soapy water. You can also use a tarnish cloth to remove any stubborn marks.

Diamonique is the brand name used by television shopping network QVC for their cubic zirconia simulated colorless diamond, simulated colored diamond, and simulated colored gemstone jewelry (cubic zirconia is a common type of gemstone substitute).

The simplest way to clean your diamond jewelry is to soak the pieces in warm water mixed with an ordinary de-greasing solution like dish soap. Avoid harsh chemicals like bleach or toothpaste, which can erode precious metals over time.

Yes! To clean your jewelry using isopropyl rubbing alcohol, fill a small bowl with it—just enough to fully cover the piece you wish you clean. Leave the jewelry to soak in the bowl for a few minutes. Alcohol dries completely clear on metal surfaces so there is no need to rinse it off with water.

First, soak your CZ jewelry in warm water and detergent and let it sit for at least 2 minutes. Then use a soft-bristled toothbrush or a cosmetic brush to scrub the jewelry piece until an even sparkle reappears. Remember to rinse and dry the jewelry piece thoroughly to avoid leaving a cloudy residue on your jewelry.

While Hordern notes that a mild washing-up liquid is safe for cubic zirconia, she advises against cleaners that are more abrasive. "Avoid using 'dip' polish or abrasive jewelry cleaners as these contain harsh chemicals and can destroy your jewelry over time," she says.

that rivals the flawless brilliance of diamonds, but at. fraction of the cost!

DQ stands for Designer Quality. These jewellery findings of high European quality metal are of course nickle free. Therefor our DQ metal beads, charms and findings will last a long time.

A cubic zirconia is a real cubic zirconia, but it is not a real diamond. However, there are a few types of stones that are used as diamond simulants, and cubic zirconia is by far the most common and the most realistic.

Although it may seem simple, the best homemade cleaner for diamond jewelry is a solution of dawn dish detergent and warm water. This solution is perfect for normal use which is expected for newer jewelry.

Can you use Dawn dish soap to clean diamonds? ›

We recommend mild dishwashing soap (like Dawn). It is important to avoid dishwasher detergent, which is too harsh and could damage your diamond.

Toothpaste, baking soda, bleach, and other household cleaners are abrasive. While they won't damage your diamond, they can damage your gold. Windex won't hurt your ring, but it isn't a great cleaner either. So stick to mild soap and water, and six-month cleanings and check-ups at your jeweler.

Hydrogen peroxide is most effective to clean jewelry base metal with. It is safe to apply on metals like gold and silver and won't harm them as long as it is used gently. It successfully extracts the fat deposits that have accumulated on the jewelry due to environmental factors.

If you'd like to disinfect your jewelry, you can use regular household isopropyl alcohol or hydrogen peroxide, as long as the jewelry is solid gold or platinum and is only set with diamond, ruby, or sapphire. Take care with any other kind of stones and use a gentler form of cleaning.

A: Yes, cleaning jewelry with baking soda and vinegar is pretty simple. Mix 1/2 cup vinegar and two tablespoons of baking soda in a small bowl. Allow your jewelry to soak in the white vinegar and baking soda solution for a few hours.

Liquid Soap or Warm Water

Warm water & liquid soap will do wonders for restoring a crisp, clean look to CZ rings. You can wash the jewelry piece with your fingers pretty gently or with a soft cloth.

Harsh Chemicals / Ammonia / Bleach / Household Cleaners / Toothpaste: These substances can cause a chemical reaction that disintegrates the alloys in jewelry over time.

Window cleaners like windex does wonders on your windows doesn't it? The ammonia based cleaners leave your windows with a renewed sparkle, and will do the same for cleaning CZ jewelry.

The reason given was that CZ is oxygen deficient and it will absorb oxygen from the atmosphere causing it to become cloudy.

To preserve their shine and beauty, cubic zirconia gems should be cleaned monthly. Cleaning is a quick, simple process that involves scrubbing cubic zirconia with mild dish soap and water. When you're done, your jewelry should look shiny and new.

How do you keep cubic zirconia from getting cloudy? ›

To keep your cubic zirconia from getting cloudy, clean it every few months to maintain its beautiful shine. The secret is to clean all areas of the stone, including the bottom. A dirty underside, pavilion and culet, reduces light performance and sparkle.

Moissanite Arguably the best faux diamond in existence, moissanite comprises silicon carbide, which means it is almost of the same hardness as a natural diamond. It also has reasonable colorlessness, although the glow is far more colorful than what you would see in a real diamond.

Moissanite. Currently, the most sought-after fake diamond stone name in the industry is the moissanite. Moissanite has developed a reputation for being the best alternative to natural diamonds since they can rival them in brilliance.

Cubic zirconia, also known as CZ, is one of the most widely used stones to imitate a real diamond. The reason for its popularity is the affordable price, which is only a fraction of what a real diamond costs.

The first C stands for Diamond CUT.

A: The 926 stamp hallmarks jewelry that is 23 karats of gold, or 92.6 percent pure gold.

If you visit any jewellery shop and find it difficult to differentiate between these stones, you should observe them in the brightest light. You will see that the diamond has white or silvery sparkles only. However, cubic zirconia will give out colourful sparkles such as red, yellow or blue.

Price. Cubic zirconia is very inexpensive, since it's synthetic and mass-produced. A cut and polished one carat cubic zirconia stone will cost $20 and a similar two carat stone will cost about $30. This is far cheaper than diamonds, which start at $1800 for one carat and increase considerably as size goes up.

Moissanite is harder and more durable than cubic zirconia, so it is less likely to chip and crack when in a ring setting. Choose cubic zirconia if you are shopping for earrings or a pendant, as this type of jewelry is less likely to be damaged. People are less likely to get a close-up look at earrings or pendants.

What is considered a mild soap for cleaning jewelry? ›

Dawn dish soap is safe and effective at cleaning jewelry. Just add a few drops to a warm basin of water and let your jewelry soak for 15-30 minutes. Then remove it from the basin and gently brush with a clean, soft-bristled toothbrush to get grime out of the grooves. Finally, rinse and dry.

To clean diamonds, professional jewellers will use a specialised device referred to as an Ultrasonic Jewellery Cleansing Bath to get your piece sparkling once again. This device uses vibration and ultrasonic sound waves to lift the dirt and other pollutants off your diamond.

Chlorine bleach or abrasives (such as household cleansers or toothpaste) should never be used when cleaning diamond jewelry. Chemicals like chlorine can damage some of the metals used to alloy gold for diamond settings and abrasives can scratch gold and other metals.

Use Ammonia

Work is required to keep your diamond shining bright. Diamond jewellery can be cleaned by soaking it in a solution of one cup of warm water and one-fourth cup of ammonia for about 15 minutes.

Dish Detergent & Warm Water

The best homemade jewelry cleaning solution is a mixture of a few drops of Dawn dish detergent in warm, not hot, water. Let the piece sit in the solution for a few minutes, longer if it's very dirty, then gently scrub with a new, baby-size, soft toothbrush.

A solution of 50% Windex and 50% hydrogen peroxide can be used to clean your silver or gold diamond ring. Windex is a glass cleaner and it will remove excess dirt build-up and oily residue from your ring. Hydrogen peroxide is also an excellent cleaner, and it has the added benefit of being antibacterial.

It is a common myth that toothpaste is a good way to clean your jewellery. This is actually false. Toothpaste can damage your diamonds, gemstones, gold and silver. Toothpaste is abrasive and has a hardness of around 3/4 on the Mohs Scale of Hardness.

For a quick cleaning solution for gold and diamond jewelry, try a little isopropyl alcohol. You can fill a small container with some alcohol and drop your jewelry directly into the solution. Let it soak briefly and then remove the item. The nice thing about alcohol is that it will dry clear.

Simply add a couple of drops of liquid dish soap and warm water/hot water to a heat-proof bowl. Next, dip a soft cleaning cloth into the soapy water and rub it on your jewelry to remove the dirt or tarnish. Lastly, simply rinse off with cold water and dry with a soft microfiber cloth.

Another great way to clean your sterling silver jewelry is with Windex. Yes… Windex. You can either spray the Windex directly on the item to be cleaned or on a soft-bristled toothbrush or soft cloth.

How do I clean a diamonique ring? ›

"The best way to clean diamond rings is to make a solution with warm water (almost hot) and dishwashing soap. Soak your ring for about 20 to 40 minutes, gently brush the stone with a very soft toothbrush, and then rinse under warm running water," advises Mann. "If needed, repeat."

We recommend mild dishwashing soap (like Dawn). It is important to avoid dishwasher detergent, which is too harsh and could damage your diamond.

Toothpaste, baking soda, bleach, and other household cleaners are abrasive. While they won't damage your diamond, they can damage your gold. Windex won't hurt your ring, but it isn't a great cleaner either. So stick to mild soap and water, and six-month cleanings and check-ups at your jeweler.

While vinegar is slightly acidic and needs to be used with caution on more porous stones, it will do a fabulous job on your diamond ring. Simply mix a half cup of white vinegar with 2 tablespoons of baking soda. Stir until the baking soda is totally dissolved, then soak your diamond ring in the solution for 2–3 hours.

Super Glue

This is because it tends to cloud the rhinestones when the glue interacts with the silver foil. The picture below shows a close-up of a flat back rhinestone with the silver foil backing clouded by super glue. As for suitable surfaces; metal, glass, ceramics and some plastics are fine with super glue.

Yes, you can use hydrogen peroxide with baking soda to clean and maintain your fake jewelry.

Liquid Soap or Warm Water

Warm water & liquid soap will do wonders for restoring a crisp, clean look to CZ rings. You can wash the jewelry piece with your fingers pretty gently or with a soft cloth.

Use Of Alcohol When Cleaning Cubic Zirconia Jewelry

It helps to preserve the host metal and its surface so that it maintains the original feel. Alcohol does not react with metals and will, therefore, not cause corrosion on the surface of the metal.

Buy a bottle of rubbing alcohol from a drugstore or retail department. Then take a small bowl, and pour the alcohol into it. Soak the jewelry in it for half an hour. Then take the jewelry out, and wipe off any excess alcohol on it.

Lay all of your darkened costume jewelry on the foil. Mix one tablespoon salt and one tablespoon of baking soda and mix with one cup warm water. Pour into the dish. The mixture will create a chemical reaction with the foil and bubble as it cleans the jewelry.

Will jewelry cleaner ruin fake jewelry? ›

You can't use regular jewelry cleaner, meant for real stones and metals, on costume jewelry, or it will eat away the finish.