ByRookie Parenting Science Updated On:
Making a rainbow is a fun and educational science experiment that can be easily done at home or in the classroom.
It involves using a light source, such as sunlight or a flashlight, and a medium to separate the light into its component colors.
The result is a beautiful display of the colors of the rainbow, which can be used to teach about the nature of light and color.
This experiment is an engaging way to introduce children to the basics of optics and the physics of light.
How Are Rainbows Formed?
Sunlight or white light is a mixture of all the rainbow colors. The different rainbow colors are essentially mixed together to result in a white color.
You may wonder why when you mix all the different colors of paint together result in black instead of light. That is because light mixing is additive while pigment mixing is subtractive.
When light passes from one medium to another medium of a different density (e.g. from air to water), the light bends. This is known as refraction of light1(Morelight experiments).
How much a light is refracted depends on the wavelength of the light. The shorter the wavelength, the more it bends. Because lights of different colors have different wavelengths, each color is refracted by different amounts.
Therefore, white light is split up after passing from air to water and the individual colors become visible. This dispersion of light allows us to see the spectrum of colors that form arainbow2.
In nature, a rainbow is formed when sunlight is refracted on entering a droplet of water, reflected inside the back of the dropletand finally refracted again on leaving the droplet.
Seeing A Rainbow
To see a rainbow caused by sunlight, the sunlight needs to come from behind us because rainbows only appear in the part of the sky directly opposite the sun.
Red has the longest wavelength among the visible colors. So it tends to bend the least and the angle between the incident light and our line of sight for red is approximate 42 degrees. As a result, redappears on the top of the rainbow
Violet has the shortest wavelength. It tends to bend the most. To see violet, the angle between the incident light and our line of sight is roughly40. So violet appears at the bottom of the rainbow.
Why Are Rainbows Arched?
Rainbows are not two dimensional. A rainbow is seen at an angle that is between 40-42 degrees from the incident sunlight. So all the water drops that produce each color in the rainbow lie on a three dimensional cone. Our eyes are at the tip of the cone.
That is why rainbows are arched. The circular shape below the ground is invisible.
Rainbow Experiment
Now are you ready to make some rainbows? Here are 3 easy ways to make your own rainbows at home.
Warning: Adult supervision is vital in experiments involving sunlight. Do not look directly at the sun or at the reflection of sun in a mirror.
1. Rainbow Prism
Active Time: 15 minutes
Total Time: 15 minutes
One of the easiest and most visually stunning ways to seean artificial rainbow is by usinga prism. Creating rainbows using a prism is really fun.
Materials
- strong sunlight
Tools
- glass prism
- white cardboard / paper (optional)
- adult supervision
Instructions
- Place a piece ofwhite paperon the ground under the sunlight.
- Put the prism on or above thepaper.
- Rotate and move the prism around until you see rainbow colors on the paper.
Recommended Products
As an Amazon Associate, I earn from qualifying purchases.
Did you try this project?
Follow us on Pinterest and share a photo!
2. Rainbow On The Wall
Active Time: 15 minutes
Total Time: 15 minutes
No prism? No problem. Using a small mirror and a glass, you can make a beautiful rainbow on the wall.
Materials
- water
- sunlight
Tools
- a clear glass
- small mirror
- adult supervision
Instructions
- Fill the glass with water.
- Put the mirror into the water inside the glass at an angle.
- Position the glass so that sunlight shines directly at the mirror. You may have to shift the mirror to find the right angle.
- Look for areflection on the wall.It would be easier to see if the room is dark.
- Adjust the angle of the mirror until you see a rainbow on the wall.
3. Make A Rainbow Using Flashlight
Active Time: 30 minutes
Total Time: 30 minutes
You can still make a rainbow without natural light. Try this experiment using a whitelight flashlight.
Materials
- water
Tools
- clear glass
- flashlight that emits strong focused white light. Flashlights that emit only yellowish light won’t work. Flashlights that don’t emit focused light also won’t work. Look for one with parabolic reflecting mirrors inside to focus the light, or one with a strong LED light.
- 2 pieces of white cardboard
- adult supervision
Instructions
- Fill the glass with water.
- Cut a narrow rectangle in the middle of onepiece of paper.
- Stick that paper to the outside of the glass so that the slit is at the center.
- Place the other piece of paper on the floor on the other side of the glass to catch the rainbow.
- In a pitch dark room, point the flashlight atthe slit.
- Start from the glass and slowly move the flashlight farther and farther from the glass.
- Adjust the distance and angle of the flashlight until you see a rainbow on the paper on the other side.
Recommended Products
More Making a Rainbow Experiments
If you’re a rainbow enthusiast, want more rainbow experiments, or wonders what makes a rainbow, here are a few fun science projects for you.
Learn More About Rainbows
Have Fun With Rainbows
References
1.
Jiang W, Chen RT, Lu X. Theory of light refraction at the surface of a photonic crystal. Phys Rev B. June 2005. doi:10.1103/physrevb.71.245115
2.
Whitaker RJ. Physics of the Rainbow. The Physics Teacher. May 1974:283-286. doi:10.1119/1.2350374
Last update on 2024-01-02 / Affiliate links / Images from Amazon Product Advertising API
