If you don't know how to pour beer, you'll end up with a poor beer. There are many ways to enjoy this wonderful, hoppy beverage. You can drink beer cold or warm, on a beach or in a bar.
Still, there are a few steps to take whenever pouring some beer to optimize the taste. We'll walk you through the best practices for pouring and why each step matters. Adhering to our guide will ensure you achieve the best flavor, mouthfeel, and overall appearance in your beer pour.
How to Pour A Beer: Perfect Beer Pour
Whether you're pouring from a normal tap, nitro tap, bottle, or can, the perfect beer pour consists of the same few steps.
- Use a clean glass. Remnants of other types of alcohol or even dish soap will change how the beer tastes and develop foam. Don't waste a great beer on a subpar glass.
- Tilt the glass 45 degrees. This will allow the beer to slide down the edge of the glass and prevent too much foam, also called head, from forming.
- Pour beer into the center of the glass. You can avoid splashback or overpouring by pouring into the optimal area.
- Level the glass when half to two-thirds full and pour until full. This will achieve the proper amount of foam. The head should be one-half inch to 1 1/2 inches.
How to Pour The Perfect Pint of Guinness
There are unique steps to take when pouring a Guinness that sets it apart from other beers. Just make sure you know how many ounces in a pint.
- Use a Guinness glass. When pouring, use a glass designed specifically for Guinness. It is essential for the steps below.
- Tilt the glass 45 degrees. There are no exceptions to this rule as it is needed for proper foam creation.
- Slowly tilt the glass while pouring. Instead of waiting until half-full, slowly tilt the glass throughout the pour.
- End on the harp. End the pour three-quarters of the way up the glass, not when the glass is level. This optimizes the head for a Guinness.
- Let it rest. Wait to drink until the beer has settled and shows off the deep, black color that is synonymous with Guinness.
How to Pour Beer Without Foam
To minimize the amount of foam in a beer, pour beer into a glass angled at 45 degrees. Pour as closely as possible to the glass, and slowly level the glass once it's too full to continue to pour at that angle. The longer you pour a beer into a tilted glass, the less foam that will be present in the final product. You may still have to wait a moment after pouring for the small amount of foam that does appear to dissipate.
Foam is an integral part of a properly poured beer. If you truly don't enjoy the taste or feel of foam, try to aim for only half an inch.
A beer with no foam at all often tastes flat and the presence of foam indicates proper carbonation. If you pour beer and it doesn't develop any foam at all, you might want to check the beer expiration date. You don't want to find out the hard way that beer goes bad.
How to Pour Beer From Tap: How to Pour Draft Beer
To pour draft beer, tilt the glass 45 degrees and place it as close to the tap as possible. Pull the handle and fill the glass halfway to two-thirds, then level the glass and fill to the top. This is the standard pour for beer and ensures you get the optimal amount of head in your beer. It's one of the first skills they teach you in bartending 101.
Pouring draft beer is a bit different from pouring from a can or bottle. You need to keep track of the beer left in the keg when pouring from a tap. You don't want to end up with a glass full of beer dregs and foam.
Make sure to understand how much beer is in a keg and how many pours you can get from different beer keg sizing before replacement (and learn how long does a tapped keg last). Draft beer inventory is important! This is another skill that you learn from bartending experience.
How to Pour A Nitro Beer
Pour beer from the nitro tap into a glass at 45 degrees until the glass is two-thirds full. Wait until the foam fully resides and fill the now-level glass to the top. The added period of settling allows the excess foam to dissipate and ensures you get the most beer possible with the silkiest texture.
Guinness claims that the perfect pour for nitro beer takes about 120 seconds, or two full minutes. Every type of drink has a different optimal pour, so it’s important to pay attention when you free pour.
Nitro beer is carbonated differently than a regular beer on tap and should be handled as such. In addition to carbon dioxide, nitrogen is added to change the consistency of beer. The use of nitrogen makes the beer smoother to drink, but also extends pour time as it adds foam more quickly.
How to Pour Beer From A Can
Tilt your glass to a 45-degree angle and align the can so it pours directly into the center of the glass. Once half full, tilt the glass to a level position and fill to the top. This pour should produce an ideal head that is around one-half inch. Pouring a beer from a can should be treated no differently than pouring it from a tap. Treat even the cheapest can of beer like a high-end craft beer and get the best flavor out of it. As a bar owner, this can help you price beer higher since it will taste better.
You may have to allow the beer to settle for some time in the can prior to pouring. Similar to other goods in transit, beer can react poorly to the jostling of transportation. Nobody wants to pop open a can of beer and have it explode everywhere.
"Key Takeaway: Whether you're pouring from a normal tap, nitro tap, bottle, or can, the perfect beer pour consists of the same few steps."
Frequently Asked Questions About How to Pour a Beer
Learning about how to pour a beer, whether it’s how to pour a beer from a can or simply the perfect beer pour, is something that provides quite a treat for beer aficionados. You can learn how to pour beer from tap setups, how to pour draft beer in a brewery, and ultimately how to pour all types of beer. Heck, you can even get into how to hold your glass while you pour.
Our answers to these frequently asked questions about how to pour a beer will leave you wanting to head to your favorite bar and watch the master bartenders work their pouring magic.
Should You Pour Beer With Foam?
Yes, when you pour a beer from a tap, or even from a bottle or can at home, you should aim to have a little foam at the top. It enhances the beer and your overall experience.
What Does a Perfect Beer Pour Look Like?
A perfect beer pour starts with you holding the glass at a 45-degree angle. As you pour the beer down a slant on the side of the glass, it’ll start to gather at the bottom. When enough beer has been poured to cover the bottom of the glass, slowly tilt the glass upright to finish the pour.
Should You Pour a Beer Fast Or Slow?
Beer should be poured slowly, to allow it to breathe and settle into the glass with the perfect amount of foam. Rushing a beer pour can result in a less tasty drink, and a potential mess!
Why Do You Want a Little Foam On Beer?
One of the key reasons you want a little bit of foam on a beer is to allow the carbonation to escape from the liquid. From the aesthetic and taste-driven side of things, a little bit of foam adds to the aroma of the beer and the flavor of the first sip.
Beer Me!
No matter what beer you drink, you should always aim to achieve the best result possible. You don't have to be a bartender or a cicerone certified beer server to pour a good beer.
If you pour beer properly, you'll maximize taste, look, and texture. An improperly poured beer can end up with too much foam, no foam, or an unenjoyable taste. Break out the steps listed above at your next gathering and show all of your friends the perfect pour. Their taste buds will thank you.
All alcoholic beverages have unique steps that should be followed when pouring. Doing it correctly will ensure you always get to enjoy them at their best. We can also show you the proper steps when pouring wine and the standard pours for a variety of liquors. You can become even more of a master bartender with just a few tips.
Reduce inventory counting time by as much as 85%. Schedule a demo now:
