Shoe Care Instructions - Step Ahead Shoes (2024)

FAQs

Shoe Care Instructions - Step Ahead Shoes? ›

We recommend using soapy water and a new sponge to clean the leather. Next, use a solvent to remove stains and finish off by applying a moisturiser. Your patent leather shoes will have never have looked so good!

You can put too much conditioner on leather, but don't worry. The problem will likely resolve itself as the leather absorbs the conditioner over time. How do you polish and condition leather? You always want to condition leather first, then, if you want to, add polish.

We advise wiping new shoes with a soft cloth. It doesn't even need to be a damp cloth. Give them a light brush with a horsehair brush. A little brushing will remove the dust and have them ready to wear.

Here are some tips for caring for your favourite shoes: - Regular cleaning: Use a microfiber cloth to remove dirt and dust from the surface of the patent leather. Avoid aggressive cleaning products that could damage the patent finish. - Polishing: Use a soft cotton cloth to gently polish your shoes after cleaning.

You'll often find shoe-polishing guides (including the one on The Shoe Snob Blog) that recommend using cream polish before applying a coat of wax polish. But you can use wax polish after conditioning with no ill effects—especially if your shoes' coloring is fine as is.

These chemicals can potentially damage the leather's natural fibers and finish. Residue Buildup: The waxy nature of shoe polish can cause residue buildup on leather items. Over time, this buildup can dull the leather's sheen, making it appear lifeless and worn.

Storing shoes in their original boxes or in plastic boxes can help to keep moisture at bay, improving the lifespan of your shoes. Storing them in a box will also prevent your shoes from getting crushed and creased, as they would if they were left loose under your bed or at the bottom of your wardrobe.

The now rough soles can be treated with polish, which does two things. The first is to hydrate the shoes. In the same way that dried out soil lets water drain straight through without absorbing it, dry leather is extremely porous. Fully hydrated leather (like soil) is able to resist small quantities of water.

Take a little polish on the rag and start rubbing it in, slowly, in circular motions, until you've covered the shoe with a thin layer. Add a second layer if your shoe is still looking quite dull, before allowing it to dry for 20 minutes.

Day One: Wear your new shoes for 30 minutes inside, walking around in the afternoon or evening when your feet are the most swollen. Day Two: Wear your shoes for 60 minutes inside and outside. If your shoes are particularly tight—especially dress shoes—you can wear thick hiking socks to stretch them out further.

What do you spray on new shoes? ›

The Crep spray (Amazon's No. 1 bestseller in shoe protective treatments) is designed to fend off moisture, dirt, and other stain-attracting substances from touching your favorite pairs of shoes. The brand claims the formula works on multiple materials, including leather, suede, nubuck and, thankfully, canvas.

Yes, you should be giving your shoes a little clean before you wear them. Studies have found that shoes can contain up to 10 billion bacteria which is no surprise when you consider the amount of people trying them out on the shop floor.

Use a small amount of vaseline or rubbing alcohol for tough stains. Apply the vaseline or rubbing alcohol to a q-tip or paper towel and gently it rub into the stained area. Wipe the area dry after 15-20 seconds, and reapply if necessary until the stain disappears.

Patent leather is a type of leather that has been treated with a high-gloss coating to create a shiny and reflective surface. This process makes the leather more durable and resistant to scuffs and scratches, and also makes it easier to clean and maintain.

However, unfortunately, water can damage patent leather when not cared for properly. If patent leather gets wet from rain or water spills, it can become stained and lose its shine. To protect your patent leather from water damage, you should always try to keep it away from moisture as much as possible.

For best results, we recommend polishing your boots every 4 to 6 weeks. However, this may vary depending on your needs. For example, polishing too much can damage your boots, creating an excessively moist leather that can degrade the fabric, stain it, and even be a breeding ground for bacteria and fungus.

Apply evenly using a clean cloth, sponge or your hands. Allow the conditioner to penetrate the leather for 24-48 hours, before buffing off excess with a dry cloth to get a soft sheen. This nourishes the leather, maintaining the condition of your boots and helping to repel water.