STOCK BELT SIZES
Our belts have five holes spaced at approx. 1” intervals, unless it is stated otherwise. Most people like to fasten their belt on the middle hole.
A useful guideline, although not as accurate as measuring, is to order one size up from your Jeans or Trouser Size: if you wear 32” jeans/ trousers then it is likely a 34” belt will fit.
All measurements are approximate.
| BELT SIZE | Body measurement Waist in cm | Body measurement Waist in inches |
|---|---|---|
| S | / 76 – 81cm | 30 -32” |
| M | 84 – 89cm | 33 -35” |
| L | 91.5-97cm | 36 -38” |
| XL | 99 – 104cm | 39 -41” |
| XXL | 107 -112cm | 42 -44” |
| XXXL | 114.5 -119.5cm | 45-47” |
MADE TO MEASURE
If your size is not mentioned in the table above, or falls between sizes, we are happy to make you a belt to your own requirements.
With a made to measure belt, you can also choose the number of holes you would like to have, the spacing between them, the length from the last hole to the tip of the belt or request other features.
Please read the bespoke tab on the product page or click ‘here ‘(Please insert a link to the ‘Made to Order’ page in the Bespoke Category) to contact our Made to Order Service. There is an extra charge for this.
How to measure your belt size: Take a belt you wear comfortably and measure from the leather end of the buckle ( do not include the buckle in the measurement) to the hole you buckle at. This is the size to order. If this measurement is 35.5” we will make your belt to measure 35.5” from the leather end of the buckle to the middle of 5 holes, allowing your waistline to expand a little or contract a little. These holes are normally approx.1” apart.
