What is the sign of a well-fitting suit?
There are certain things to remember when it comes to what to expect from a suit fitting. There arealso certain aspects to the fit of a suit, which stand out as being poorly fitted if you are looking for them.
1. Sleeve length. A sleeve should not finish on the hand. A sleeve should finish on the wrist, allowing a small amount of shirt cuff to show.
2. Jacket length. The jacket’s length should be in scale with the customer's torso length. A general rule of thumb is for the jacket to finish where the customer's seat meets the thigh.
3. Jacket collar. The collar of a jacket should not stand away from the neck. It should sit on and around the shirt collar, leaving no space between.
4. Sleeve pitch. Creases on the back of the bicep of a sleeve or the front of the forearm can be caused by the sleeve pitch not being correct for the customer's stance.
5. Buttoning. A well-made suit should fasten. Just. A modern slim-fitting, but well-tailored suit should button but not cause any excess creasing or pulling.
6. Trouser hang. The front of a customer's trousers should not fall down at the front and ‘collapse’ in the front causing horizontal creasing. The trousers should be suspended from the shoulders and worn around the customer's waist.
7. Trouser bottoms. The bottom of the trousers should sit on the top of the shoe with one slight break. A well-fitting suit should look effortless and be worn with confidence.
What to expect from a suit fitting including what measurements will be taken?
A bespoke tailor will require a variety of different measurements at the initial suit fitting, to measure both the dimensions of the customer's body and to determine the correct figure descriptions which are cut into the customers unique pattern. A tailor will measure with a tape measure, the usual measurements are taken, such as chest, waist, shoulders, sleeve etc. A tailor will also take measurements and examine the way a customer stands and moves whilst wearing a jacket, trousers and waistcoat. These all-important figure descriptions will be added to the pattern to correct any anomalies caused by the customer's shape or stance.
What’s the best thing to wear to a suit fitting?
It is always best to be as prepared as possible when attending a suit fitting. A long sleeve shirt is a must. If possible the actual shirt to be worn with the suit. Shoes are always very helpful, again the actual shoes to be worn would be ideal. The same applies to undergarments, a similar or the same style would be ideal.
Would you advise bringing the Ushers for a second opinion?
Maybe an ‘usher’ or the ‘best man. In my experience, a suit is best designed by the person wearing it and the tailor who is making it. A suit designed by a group will inevitably be a compromise between differing opinions.
If you buy a suit off the rack, would you recommend having it fitted? How much would alterations cost?
A ‘Ready-Made’ suit is just that. It is a suit that has been made already. Small tweaks can be made to adjust things like sleeve length and trouser length. However any more complex alterations I would discourage. I would suggest trying different brands, different fits and styles over altering a ready-made suit. The high street is full of different brands and designers, each has its own style and fit. Very often it is a case of finding the one that suits your shape or style. If you cannot find one which suits your style, or size, then I would suggest visiting a tailor to purchase a tailor-made suit.
Can you talk us through the process of having a bespoke suit made? How many fittings/appointments would this involve?
The first step when having a suit made is to do some research. There are a variety of different tailors offering different levels of service. It is also worthwhile using Pinterest and Instagram to build up a database of suit images which you like the look of. The second step is to make some appointments to meet with some tailors. You should have confidence in your tailor and hopefully, a rapport, which allows you both to design a suit that fills your criteria perfectly. Once you have chosen your tailor, you should make an appointment for the first fitting. This is normally about 3 months prior to the completion date. At this fitting you will choose, cloth, lining, style and you will also be measured. Depending on the level of service you have chosen and the tailor you have chosen you may require another 2 or 3 fittings before your suit is complete. At each fitting, the tailor will make further adjustments to the suit and you will see your design progress, until complete.
Should you have an idea of the Brides dress in order to make sure your suit is complimentary?
This is always controversial. Obviously, a groom should not see the brides dress prior to the day, because of tradition, bad luck etc. However, it is useful to know some basic information before designing the wedding suit. An idea of the feel of the dress, for example, ‘vintage’ ‘evening’ ‘formal’ or ‘traditional’ will help us choose a cloth or style which will compliment but not compete. This basic information, in my opinion, is not technically telling the Groom anything he does not already know. The wedding plans generally will be lead by the style of the dress, so the type of dress is information that could have been inferred regardless.
What fabrics would you recommend for different seasons?
I tend not to recommend different fabrics for different seasons. When it comes to weddings, I like to recommend fabrics based on the style of the wedding, the wedding venue, the wedding dress and colour scheme (if there is one).
As an enthusiast with a deep understanding of the artistry behind well-fitted suits, I can assure you that achieving the perfect fit is a meticulous process that involves a keen eye for detail and a thorough understanding of the wearer's body and preferences.
In the provided article, several key concepts related to suit fitting are highlighted, and I'll delve into each of them:
-
Sleeve Length:
- The sleeve should finish at the wrist, allowing a small amount of shirt cuff to show.
-
Jacket Length:
- The jacket's length should be in scale with the customer's torso, typically finishing where the seat meets the thigh.
-
Jacket Collar:
- The collar should snugly sit on and around the shirt collar, with no space in between.
-
Sleeve Pitch:
- Creases on the bicep or forearm can indicate incorrect sleeve pitch for the customer's stance.
-
Buttoning:
- A well-made suit should fasten without causing excess creasing or pulling.
-
Trouser Hang:
- Trousers should be suspended from the shoulders, avoiding front collapse and horizontal creasing.
-
Trouser Bottoms:
- The bottom of trousers should sit on the top of the shoe with a slight break.
Moving on to the suit fitting process:
- A bespoke tailor takes various measurements, including chest, waist, shoulders, and sleeves.
- Measurements consider the customer's body dimensions, stance, and movement to create a unique pattern.
- Figure descriptions are added to correct any anomalies caused by the customer's shape or stance.
For a suit fitting, it's recommended to wear a long-sleeve shirt, the actual shirt to be worn with the suit, and the actual shoes. Undergarments similar to those intended for the suit should also be worn.
Regarding the question of bringing ushers for a second opinion, the suggestion is that a suit is best designed by the person wearing it and the tailor to avoid compromises based on differing opinions.
On the topic of ready-made suits, small tweaks can be made, but more complex alterations are discouraged. Trying different brands and styles is suggested before considering alterations.
The process of having a bespoke suit made involves research, appointments with tailors, and multiple fittings. The first fitting includes choosing cloth, lining, style, and measurements, with subsequent fittings for adjustments.
Finally, the article touches on the idea of complementing the bride's dress without revealing specific details. Basic information about the dress's feel (e.g., vintage, evening, formal) helps choose a suit that complements without competing.
For fabric recommendations based on seasons, the focus is on recommending fabrics based on the style of the wedding, venue, dress, and color scheme rather than specific seasonal choices.
