How do I find my boundary pegs?
A: To locate your boundary pegs, simply take a walk over your lot and look towards the corners. Indicator pegs should be seen sticking out of the ground where your boundary pegs will be found below. The indicator pegs may have a coloured ribbon or a painted white top with the corresponding lot number.
The only way you can ascertain where the legal boundary is is by employing a Licensed Cadastral Surveyor. The surveyor can come to site and either locate and verify the original pegs or if they are not there can place new ones.
Survey pegs or survey stakes are used to mark out residential boundaries and indicate points and positions of a site. They are usually made of wood (although some are made of metal or plastic) and come in different sizes and coloured tops.
Marking existing boundaries for either building or sale purposes - $1,900 to $4,500 range. A site (topographic) survey - upwards of $3,000.
Survey bars are valuable to you and the greater community as an enduring record of legal boundary locations. In fact, they are so important that the Criminal Code of Canada forbids their removal under penalty of law.
If pegs are missing, or you are uncertain if they are in the right place, they can only be checked or replaced by a Licensed Cadastral Surveyor.
No, you are not allowed to remove a survey mark. Removing a mark is also an offence under Section 55 of the Cadastral Surveys Act 2002. If you accidently remove one, or expect to need to remove one, we can arrange to replace it for you. Contact us.
Peg in surveying is a short pin or bolt-type structure made up of wood or metal or plastic which is tapered at its one end to secure it in the desired point or station. Generally, the peg of a square-shaped base is used. Its side may range between 20 mm to 30 mm. Commonly used length of the peg is 150 mm.
Boundary pegs (also known as “survey pegs” or “lot pegs”) are placed on the perimeter or corners of a property's land boundaries to physically mark out the land's boundary. A land's property boundaries are established through land surveys and are marked through boundary pegs.
Finally, there is 1,4-dioxane (found in PEG-6, PEG-8, PEG-32, PEG-75, PEG-150, PEG-14M, and PEG-20M), which, on top of being a known carcinogen, may also combine with atmospheric oxygen to form explosive peroxides — not exactly something you want going on your skin.
How do you determine boundary lines?
Physical boundaries are identified on the ground and on maps and deeds by using physical features such as fences, walls, ditches, rivers, hedges, etc. Unlike a hypothetical line such features, in actuality, have thickness. In the case of fences, walls and hedges their thickness will change as they grow.
Measure the property's boundaries based on the descriptions. Using a tape measure, start from the structure and measure outward to the boundary described. Mark the boundaries with wooden stakes. Once you've determined all boundaries, measure the distance between each stake.
For a simple residential boundary adjustment, it will take around 4-7 months and cost $15K – $20K for all your costs. We do Cross lease amendments and Cross lease conversions to freehold titles. These also take around 4-6 months to complete. A Cross lease amendment usually costs around $10k-$15k.
Protected by the law
The law not only provides for the estab- lishment of survey markers, but also the conse- quences of removal or tampering with them. Under the Criminal code of Canada, R.S. 1985, c. C-34, s. 398, it is illegal to remove or tamper with an official boundary marker.
All private property ownership records in Ontario are registered with the government. Anyone can search for land records. You can search: land registration records online using the OnLand site.
Usually, property lines are defined by knowing where the corners of your property are located. Here's how it takes place by boundary survey professionals: Locate survey monuments at each corner of the house. Using a loop, tie the string to one monument and extend it at the opposite end of the line to the monument.
What are Boundary Pegs? A boundary peg is a physical peg placed by a Licensed Cadastral Surveyor to define the legal boundary of a parcel of land.
Survey markers, also called survey marks, survey monuments, or geodetic marks, are objects placed to mark key survey points on the Earth's surface. They are used in geodetic and land surveying. A benchmark is a type of survey marker that indicates elevation (vertical position).
Each segment will contain numbers and letters indicating the direction from North that the line proceeds as well as the distance to the next point. For example, a segment may have the notation N 15° 30′ 45″ E on one side of the line and the notation 166.25′ on the other side of the line.
