How do you clean Diamonique stones?
We recommend you clean your Diamonique jewellery simply by using soapy water. You can also use a tarnish cloth to remove any stubborn marks.
Diamonique is the brand name used by television shopping network QVC for their cubic zirconia simulated colorless diamond, simulated colored diamond, and simulated colored gemstone jewelry (cubic zirconia is a common type of gemstone substitute).
A diamond measures 10 on the Moh Scale, which is the scale that measures the hardness (or scratch-resistance) of a gemstone. Only a diamond can scratch a diamond. Diamonique and other cubic zirconias respectably measure 8.5, following sapphires and rubies at 9.
Rinse well with warm running water and pat dry using a soft terry towel. Don't let your jewelry air dry as it may leave water marks on the metal's surface due to the waters acidity and added chemicals. To break down thick buildup: use a wet soft toothbrush dipped in baking soda. Use on metal and hard stones only.
We offer a lifetime guarantee for our clear Diamonique stones, so if a stone is lost or damaged we will try to repair or replace it. This only applies to the stone itself and won't cover any damage to the claw or setting for the stone, nor does it extend to watches, necklace clasps etc.
What Stones are Comparable to a Diamond? Moissanites or white sapphires are most comparable to a diamond. While there are visible differences, these gems will look the closest to a diamond while offering a more affordable price.
Of all the white gemstone alternatives, moissanite looks and behaves the most like diamond. When viewed side by side, diamond and moissanite are typically indistinguishable.
On QVC they sell beautiful Eternity platinum-clad Diamonique wedding bands (that will never turn your finger green) and look amazing!
Moissanite has a hardness score of 9.25 and CZ, 8-8.5. This means that Moissanite is harder to a clear extent. As for the “toughness” rating, which would indicate how likely or unlikely the stones are to break, Moissanite really kills it here. It has a toughness rating of 7.6 PSI to 2.4 of Cubic Zirconia.
What is Diamonesk? Your Guide to Affordable Jewelry - YouTube
Can you clean diamonique?
We recommend you clean your Diamonique jewellery simply by using soapy water. You can also use a tarnish cloth to remove any stubborn marks.
- Boiling hot water will lift off natural oils, lotions, and built-up dead skin cells from the gold and will help restore its shine.
- Unlike hot tap water, boiled water will be softened and purified, making it better for cleaning your gold.
Cubic zirconia, also known as CZ, is one of the most widely used stones to imitate a real diamond. The reason for its popularity is the affordable price, which is only a fraction of what a real diamond costs.
Brilliance. The most obvious difference between moissanite and diamonds is their brilliance. In general, moissanite may have more brilliance than a diamond. “It has more fire and brilliance than any other gemstone, meaning it has more sparkle,” reveals O'Connell.
Ammolite. In 1981, the World Jewellery Confederation (CIBJO) declared ammolite a new organic gem. Occurring in limited deposits in the Rocky Mountains, this gem material is much rarer than diamond.
| Look | Hardness | |
|---|---|---|
| Lab Diamond | 100% Diamond! | 10/10 |
| Moissanite | More Sparkly Than Diamond | 9.25/10 |
| White Sapphire | All White Sparkle | 9/10 |
| White Topaz | White & Gray Sparkle | 8/10 |
You can tell if a diamond is real with a flashlight when the diamond is observed to successfully separate light into spectral colors, where the fake comparison stone does not.
What Is Moissanite? Moissanite is an interesting gemstone, because it is both synthetic, and a diamond simulant. It is not, however, a synthetic diamond. It is a diamond simulant because it is made to look like a diamond.
Stainless steel, platinum and rhodium-plated jewelry, which includes almost all white gold, are less likely to react to your skin. Look for these specific metals when shopping for rings and decrease the chances of buying jewelry that will turn your finger green.
Wipe away stubborn green stains with rubbing alcohol. Alcohol is a powerful astringent that quickly and thoroughly removes stubborn green stains. Saturate a rough rag with alcohol and scrub the rag back and forth over green fingers, rubbing until the ghastly color is completely gone.
What does 5925 mean on jewelry?
When shopping for silver rings and other pieces of silver jewelry you may see a small stamp on the inside, and if you look closely, it may read s925 or 925. This stamp means the piece is made of sterling silver, or in other words, the metal is 92.5% pure.
Arguably the best faux diamond in existence, moissanite comprises silicon carbide, which means it is almost of the same hardness as a natural diamond. It also has reasonable colorlessness, although the glow is far more colorful than what you would see in a real diamond.
Unlike faux diamonds and other gemstones, moissanite is also an effective conductor of heat. For this reason, when using a diamond tester that detects thermal conductivity, moissanite will pass as a diamond.
Currently, lab-made cubic zirconia (CZ) is the most popular diamond lookalike. At a fraction of the price, it can rival diamond in brilliance (the light it reflects) and dispersion or fire (the colorful flashes that seem to come from within the stone).
Lab diamonds really do last forever, and there's nothing that will dull the shine or interfere with the brilliance of synthetic diamonds. It's not for nothing that they say it's impossible to tell the difference between a natural diamond and a man-made one.
While both real and simulated diamonds have the composition of carbon as the main chemical element, cubic zirconia is made of zirconia dioxide. The same carbon element in real and simulated diamonds is attributed to their hardness. Zirconia dioxide places cubic zirconia at 7.5 in the Mohs hardness scale.
Can fake diamonds pass diamond tester? Yes, some diamond simulants can pass a diamond tester. For example, moissanite, a man made gem, may pass as a diamond on a standard tester pen. This is because moissanite also has very high thermal conductivity!
To keep your cubic zirconia from getting cloudy, clean it every few months to maintain its beautiful shine. The secret is to clean all areas of the stone, including the bottom. A dirty underside, pavilion and culet, reduces light performance and sparkle.
How To Make CZ Look Real || Make Cubic Zirconia Shine Like a Diamond
- Warm soapy water made with mild, blue Dawn-brand dish soap. a) To make the solution, use 2 parts warm water (not hot!) and 1 part dish soap. ...
- Professional jewelry cleaning liquid, specifically formulated for the kind of jewelry to be cleaned.
Can you use Dawn to clean jewelry?
Dish Detergent & Warm Water
The best homemade jewelry cleaning solution is a mixture of a few drops of Dawn dish detergent in warm, not hot, water. Let the piece sit in the solution for a few minutes, longer if it's very dirty, then gently scrub with a new, baby-size, soft toothbrush.
Lemon juice or other acids can also damage delicate pieces or porous stones. "Some people will suggest using toothpaste to clean jewelry," says Doyle.
Is vinegar good for cleaning jewelry? Yes! Here's how to clean jewelry with it: Soak your pure silver bracelets, rings, and other jewelry in a mixture of 1/2 cup white vinegar and 2 tablespoons baking soda for two to three hours. Rinse them under cold water and dry thoroughly with a soft cloth.
On QVC they sell beautiful Eternity platinum-clad Diamonique wedding bands (that will never turn your finger green) and look amazing!
The diamonds in QVC are Gemological Institute of America (GIA) certified. Diamonds of QVC are tested for carat, color, clarity, and cut. Based on the GIA test, the diamond jewelrys of QVC are said to be excellent.
The best way to tell a cubic zirconia from a diamond is to look at the stones under natural light: a diamond gives off more white light (brilliance) while a cubic zirconia gives off a noticeable rainbow of colored light (excessive light dispersion).
Place a white piece of paper on a flat surface and draw a small dot with a pen. Lay the stone onto the dot with the flat side down. Through the pointed end of the diamond, look down onto the paper. If you see a circular reflection inside the gemstone, the stone is fake.
