How much space do you need around a bathtub?
Bathtubs. While there are no code requirements for tub size, minimum clear floor space alongside a bathtub should be at least 60 inches long (the length of a standard tub) and 30 inches wide. Always allow clear space for access to plumbing and/or whirlpool motors.
Plan a clear floor space of at least 30 inches from the front edge of all fixtures (lavatory, toilet, bidet, tub, and shower) to any opposite bath fixture, wall, or obstacle. Code Requirements: A minimum space of 21 inches must be planned in front of the lavatory, toilet, bidet, and tub.
In general, the smallest size is 15 square feet, which can fit a sink and a toilet. For a shower, to be installed, at least 30-36 square feet is required. For a full bath consisting of both a shower and a bathtub, you will need at least 40 square feet.
Freestanding Bathtubs
In other words, when planning the tub's location in the room, use a footprint size that is 6 inches longer and 4 inches wider than the tub's actual dimensions. The standard size for a freestanding tub is: Length: 55 to 72 inches (about 4 1/2 to 6 feet) Width: 27 to 32 inches.
Bathtubs. While there are no code requirements for tub size, minimum clear floor space alongside a bathtub should be at least 60 inches long (the length of a standard tub) and 30 inches wide.
Typical pre-constructed surrounds have a length of 60 inches, a height of 32 inches and a width of 32 inches-this generally can fit a small to moderate sized bathtub. This extends to higher or larger sizes which come in with a length of 60 inches, a height of 72 inches and a width of 60 inches.
Shower and Bathtub Combinations
The standard bathtub dimensions are 32 inches wide and 60 inches long, so most bathroom and shower combos are 60 inches by 36 inches by 72 inches or 60 inches by 30 inches by 72 inches.
2-wall glass shower enclosures could be perfect for smaller bathrooms. They can help you save space so that you don't have to relinquish the idea of having a bath and a shower in your tiny bathroom. Another great option is to angle the sink cabinet to save some space you can later use for a shower or a tub.
Tub to Shower Remodel: How to Measure for Your Onyx Shower Kit
60 inches long(5ft), 30 inches wide (2.5ft) with a water depth of 16 inches (1.3ft). Small sizes start at 45 inches long (3.75 ft), 30 inches wide (2.5 ft) with 14 inches of water depth (1.16ft).
How long do acrylic tubs last?
Acrylic bathtubs are very easy to install and have a lifespan of 10-15 years.
A back to wall freestanding bath is a great option if you're limited for space around your bath. This style of bath is best suited in confined bathrooms as it butts back to the wall, allowing extra space in the bathroom.
Start simple if you want to find a way to use the space at the end of your tub. Generally, people use this added space to hold bath/shower products, like soap, shampoo, conditioner, lotions, and oils. Additionally, you can use the section at the end of your bathtub to place candles or incense on.
Surface | Pros |
---|---|
Tile | Tile is 100-percent waterproof as long as it is expertly installed |
Beadboard | Beadboard helps to protect walls against direct moisture from shower or bathtub |
Tileboard | Tileboard can be a quick fix for bad drywall in a kitchen or bathroom |
To calculate the overage, multiply the square footage by 1.1 for 10 percent overage or 1.2 for 20 percent overage. Say you need 80 square feet to cover the area, and you want to buy 20 percent overage. Multiply 80 by 1.2 to get 96 square feet, which is how much tile you should purchase.
Acrylic. Acrylic is an exceedingly popular choice for bathtub surrounds—and for good reason. Unlike expensive natural stone or tile that comes with high-maintenance grout lines, acrylic features a smooth surface that pairs well with any aesthetic and is a breeze to keep clean.
A fiberglass tub is the least expensive type you can buy. Unfortunately, it's prone to scratching and doesn't wear well, lasting about a dozen years. Fiberglass with an acrylic finish will hold up longer. Porcelain-Enameled Steel: This is a steel-based material covered in porcelain enamel.
The bigger issue is when the width of the new tub exceeds the old space. Replacing a 30-inch tub with a 32-inch tub is an example. If the floor is concrete, this makes adjusting the flooring more difficult. Tile, vinyl, and wood gets brittle with age.
The shortest freestanding tub is a mere 48 inches, or four feet long, and can work well for children's bathrooms or even for adults of average height.
So what colors make a bathroom look bigger? According to basic design principles, light colors such as white, crème, pastel blue, gray or yellow will visually expand a room, while dark colors such as a deep red, green or brown, will make a room feel smaller.
Is a walk-in shower a good idea?
Benefit: Easy Cleaning
That's part of the beauty of a walk-in shower: there are fewer nooks and crannies to scrub than with a traditional shower enclosure. Its surfaces are smooth and nonporous, so a simple wipe down and they're good as new. Also, you can say goodbye to dingy, mold-attracting shower doors and curtains!
When Your Bathtub Doesn't Fit!? [Quick Tip] - YouTube
These surrounds are made of acrylic, and the panels are attached to the walls with special adhesives. If you are installing a tub surround and you need to cut holes for the faucet and spout or trim it to fit the space around your tub, make sure you cut it carefully to avoid chipping or damaging the tub surround.
The standard tub size for an alcove fixture is 60 inches long, 32 inches wide, and 18 inches deep.
Installing a Tub Surround-DIY - YouTube
Bathtub Framing Tip - Advanced Carpentry Techniques and Tips for ...
Bathtub Drain Measurements
The drain hole should be a minimum of 12 inches away from the wall and 9 inches in scope. To rough in the drain, use a 1.5-inch pipe.
The standard rough-in dimension for a bathtub is 60-¼”.
I'm not just talking about tubs with stains or grime buildup but the entire tub, or the material it is comprised of, actually turns yellow. It can happen to bathtubs made of acrylic, ABS, and fiberglass to a varying degree though ABS tends to turn a deeper yellow than the others.
While acrylic tubs are easier to repair than many other tub materials and can be chip resistant, they are prone to staining and scratching when improperly maintained or cleaned.
Which is better for a tub acrylic or fiberglass?
Bottom line is that acrylic is a stronger material than fiberglass. Acrylic tubs effectively resist wear and tear for years on end, while fiberglass is prone to scratching and cracking. Fiberglass also fades more quickly, especially if exposed to sunlight coming in through a window.
So you are installing a new bathroom and suddenly have hit a snag-which should you install first, the flooring or bathtub? The short answer is that standard bathtubs such as alcove and corner bathtubs should always be installed first, followed by the wallboard, the subfloor and the vinyl.
No, it doesn't have to be. Traditionally, tiles are used in wet areas of a bathroom (around the bath and within the shower enclosure) as a means to waterproof walls but there are now alternative materials to add a decorative, waterproofing to bathroom walls.
Yes. In addition to helping to visually extend the bathroom the sculptural silhouette and taps of the freestanding bath can become a designer feature.
Always allow at least 200mm between the edge of a freestanding bath and the wall behind, and 300mm from each end. You'll thank us when it comes to cleaning around it!
One of the biggest considerations to make when looking at the placement of a freestanding bath is ensuring it's far enough from the wall to allow for ease of cleaning behind the bath – we recommend at least 100mm.
For a typical standard, wall-wall bathtub, the measures will be roughly 60 inches long, 30-32 inches wide.
The standard rough-in dimension for a bathtub is 60-¼”.
I've worked with new freestanding-like bathtubs called “back-to-wall” tubs that are designed to be installed against a wall. This design may fit smaller spaces and allows for back of tub access for an easier install.
While it's not necessary to tile around a freestanding tub, if the freestanding tub is against a wall, you'll need to protect the wall from water damage. Tile is not the only option. Alternatives include wainscot, glass brick, and mildew-resistant paint. Wainscoting on wall behind freestanding tub.
What shape bath is most comfortable?
Oval bathtubs manage to do everything well enough, rather than excel in one particular area. The shape offers just the right amount of support to your back for comfort, whilst also being easy to install and nice to look at.