What happens if your trucks are smaller than the deck?
What Happens When Your Trucks Are Too Narrow. When you're trucks don't match your board and aren't wide enough you'll get the carpet riding effect. You won't be able to see your wheels, just your deck. Just a tad too small doesn't really matter but at a certain point, you'll run into trouble.
For the perfect truck size, you are aiming to match the overall truck width to the deck width, for example, a 7.75" deck matches a 5.0" truck, an 8.0" deck matches a 5.25" truck.
What Size Skateboard Trucks? | Skateboard Buying Guide | Tactics
Skateboard trucks are the most important part of your board, perhaps even are the heart and soul. Trucks have a huge impact on how your board feels and performs, they also last the longest.
The faster you intend on riding, the tighter your trucks should be. Tight trucks provide stability at higher speeds, reducing the likelihood of catching the dreaded speed wobbles. If you're considering riding downhill, or if a vert ramp session is in your future, consider tightening your trucks for safety's sake.
The right size trucks for an 8″ deck is typically a 5.25″ truck.
| Skateboard Truck Size Guide | ||
|---|---|---|
| Deck Size | Hanger Width | Ace |
| 7.5 to 7.75" | 127mm / 5" | 22 |
| 7.75 to 8.25" | 137mm / 5.25" | 33 |
| 8.25 to 8.75" | 149mm / 6" | 44 |
For stability while cruising, medium tightness is preferable. This should keep the trucks loose enough for turning. However, tighten the trucks if you tend to skate downhill or plan to do some practice rides on a steep slope or ramp.
| Deck size | Axle width | Hangar width |
|---|---|---|
| 8 inch to 8.5 inch | 8.0 inch / 203 mm | 5.25 inch / 139 mm |
| 8.5 inch to 9.0 inch | 8.5 inch / 216 mm | 5.75 inch / 149 mm |
| 9.0 inch to 10.0 inch | 9.0 inch / 229 mm | 6.5 inch / 169 mm |
| 10 inch or more | 10.0 inch / 254 mm | 8.5 inch / 215 mm |
Many top-level pro skaters use Thunder trucks and the Hollow Lights II trucks in particular. What makes these trucks ideal for skateboarding is that they have a forged baseplate that adds impact resistance as well as hollow kingpins and axles to reduce the weight.
What are bad trucks?
- 2014 Chevy Silverado 1500. The 2014 Silverado 1500 is one of the only Chevy Silverado model years to avoid due to peeling paint and faulty A/C systems.
- 2012 Ram 2500HD. ...
- 2008 Nissan Frontier. ...
- 2016 Toyota Tacoma. ...
- 2010 Ford F-150.
Trucks and wheels won't be affected as critically. Deck will not be as crisp after it dries out.
WHAT SIZE TRUCKS SHOULD YOU BUY? - YouTube
A good test to see if your trucks are too loose is to lean with your full weight on one side of the skateboard. If the wheel can touch your board, then your trucks are definitely too loose. Even if your wheel cannot touch your board, you might need to tighten your trucks to regain some stability.
Loose trucks or tight trucks? - Whale Talk - YouTube
Loose trucks are harder to skate than tight trucks. There, I said it. That's not to say that tight trucks are easier, or that loosening up the kingpin nut a few turns is going to make you lose all your tricks. I'm talking about skating them loose enough to wobble when you shake the board side to side.
The 139s have a 137 millimeter hanger with an 8 inch axle. This size is built specifically to fit with boards between the 7.75 and 8.25 inch width range.
What Size Trucks For An 8.25 Deck? The Krux: 8.25 Truck - YouTube
What Happens When Your Trucks Are Too Narrow. When you're trucks don't match your board and aren't wide enough you'll get the carpet riding effect. You won't be able to see your wheels, just your deck. Just a tad too small doesn't really matter but at a certain point, you'll run into trouble.
Made of strong titanium, Thunder skateboard trucks are ultra lightweight and have an amazing quick turning response. Their trucks maintain a high level of stability, and will last for years to come! Give your trucks extra flexibility with Thunder skateboard bushings.
