What is the difference between iron-on vinyl and permanent vinyl?
Adhesive Vinyl has a backing that is peeled away to reveal a sticky adhesive, it may even feature a grid-like pattern to help you make straight cuts. Iron-On on the other hand has a clear, shiny protective carrier sheet that's used to protect the Iron-On from heat during the application process.
Both types of vinyl need heat and pressure to transfer an image to fabric. However, there are a few notable differences between the two. Iron-on is a special paper that is lightweight than HTV and can be applied in one layer. HTV is more effective with large designs and using a heat press is recommended.
Adhesive Vinyl can come in all kinds of colors and finishes, but it will always have a paper backing and be sticky to the touch when that backing is peeled off. Heat Transfer Vinyl, on the other hand, does not have a paper backing. Instead, HTV, has a clear plastic carrier sheet that covers the top of the vinyl.
Yes, you can apply heat on permanent vinyl. You can use an iron or heat press to make the vinyl adhere to your surface of choice. However, you must not expose the vinyl to heat for too long because this may cause irreparable damage to your vinyl and surface.
Iron-on transfers are more lightweight than heat transfer vinyl, and they can apply bold colors in just one layer. They're also a special kind of paper. So you can print off your design, cut away excess paper, and iron it onto your desired item.
Premium vinyl is adhesive vinyl, like a sticker, it is either permanent or removable. Thus, it is best used for smooth surfaces but is not advisable to be used on fabrics or any piece of clothing. Premium vinyl may initially adhere to the clothing, but it won't hold up when washed and may peel off.
Note: Standard transfer tape is recommended. Make sure your project surface is clean and dry. Carefully place the transfer tape with vinyl images onto your surface how you would like them to appear.
Not Enough Pressure
First things first, the most common reason your HTV may not be sticking to your shirt, sweater or whatever else you're applying it to may be because you're not using enough pressure. And pressure is important. Without it, your HTV projects may not be as long lasting as you would like.
The top choice for permanent adhesive vinyl is the Oracal 651 Craft Vinyl Roll. This product is designed to stick to most flat surfaces, including wood, metal, glass, and walls. It's incredibly thin, measuring just 0.6 mm thick, making it very easy to weed and transfer.
As I mentioned above, the best heat transfer vinyl for t-shirts is Siser EasyWeed. EasyWeed is the top all-around iron-on vinyl for all sorts of fabrics, remaining a tried and true choice for t-shirt makers and crafters alike.
What surfaces can I use permanent vinyl on?
What surfaces can you use permanent vinyl on? Both removable and permanent vinyl is best used on any smooth surface. You can place permanent vinyl on surfaces like glass, metal, plastic, acrylic, painted wood, or even notebooks. Permanent vinyl cannot be used on fabrics.
After making your iron-on shirts, launder them carefully to ensure they last as long as possible. The good news is that shirts made with Cricut's Everyday Iron-On vinyl should last up to 50 washes.
![What's the difference between Everyday Iron-On and permanent vinyl? (2024)](https://i.ytimg.com/vi/-S6DzXe5p64/hq720.jpg?sqp=-oaymwEcCNAFEJQDSFXyq4qpAw4IARUAAIhCGAFwAcABBg==&rs=AOn4CLDuT8gS3qMFK9r39NDJCRV5zm1NrQ)
So do you need transfer tape? In short, probably. You can move vinyl from its backing to another location without transfer tape, but if there are any spaces or intricate details it will be very difficult.
If your vinyl isn't sticking, you can use heat to affix it better. Use a hairdryer or heat gun on the surface of the self-adhesive vinyl while applying it to your desired surface. Using heat will help it conform to any uneven surfaces a little quicker.
Heat transfer vinyl (HTV) or iron-on vinyl is a special type of vinyl used to print on garments and different fabrics. But what is the best fabric for heat transfer vinyl? HTV adheres well to cotton, polyester fabric, poly/cotton blends, canvas, and denim.
Inadequate pressure is one of the biggest reasons why HTV peels off shirts. Using a pressing pillow when pressing HTV onto shirts in a heat press helps provide more even and consistent pressure for better results.
What Type of Cricut Iron On Vinyl Works Best On Shirts? For cotton and polyester, Cricut Everyday Iron On will be your best choice for “regular” vinyl, and almost all of Cricut's specialty vinyls like glitter and foil will work as well.
Permanent vinyl should last about six to eight years, and if it's of higher quality, as long as ten years. Permanent types of vinyl are typically useful for products that require long-lasting labels and outdoor projects because they can endure all weather conditions.
Permanent Vinyl: Cricut Permanent Premium Vinyl is perfect for projects that you need the vinyl to stay put on. The permanent adhesive lasts up to 3 years, and is water-resistant and UV-resistant.
Cricut Premium Vinyl
Their permanent vinyl can last up to 3 years. You can also find the permanent vinyl in speciality types such as shimmer, pearl, frosted and more!
Can I use parchment paper instead of transfer paper?
Parchment paper is an economical substitute for expensive transfer paper. Baking parchment paper has a slightly waxy coat. This coat allows the image to transfer easily and without smearing. The paper is the right thickness for printing and will not stick to your clay.
Using parchment paper for heat press works perfectly fine with fabric surfaces and vinyl. There's really no difference between this paper and Teflon. But you have to be careful with infusible ink, especially when working with mugs.
Cricut Transfer Tape was specifically designed to make transferring vinyl designs to project surfaces a cinch. The clear film with grid makes it simple to position your design right where you want it. For use with most vinyl types, especially those with a smooth, non-textured finish.
The ideal temperature to use for heat transfer vinyl is between 260 ℉ to 315 ℉ (130 ℃ to 160 ℃) using medium pressure.
Cool Peel: allow your project to cool completely before you remove the liner. If you remove the liner while it's still warm or hot, you risk your project warping, bubbling, peeling, or stretching—not cute! Generally cool peel vinyls will have not have a sticky back to the liner sheet.
For Everyday Iron On, the settings are 315° for 30 seconds. Before you place your decal on your bodysuit, do a pre-press with the EasyPress for about 5 seconds. This pre-press helps flatten the onesie and starts the adhesion process once you add your decal.
For this purpose, permanent vinyl is best to use. They are fade-resistant and you can easily decorate your outdoors with them. As the permanent vinyl is UV resistant, the chances of fading become zero.
The final step in any vinyl project is to let the vinyl cure. Leave vinyl alone for at least 72 hours before handing it so the adhesive can fully adhere to the surface.
Generally speaking, the HTV size for adult shirts should be between 9 to 13 inches. For teen shirts, recommended HTV size should be between 6 to 9 inches. For toddlers and infants, the recommended HTV size should be between 3 to 6 inches.
- Wait at Least 24 Hours Before Washing. ...
- Wash Clothes Inside Out. ...
- Avoid Excess Heat. ...
- Don't Bleach or Dry Clean.
Can you put Mod Podge over permanent vinyl?
We have used Mod Podge (not 'Modge Podge' as I know lots of us call it) successfully for a lot of our projects, including sealing over vinyl, making custom photo canvases, and glittering pretty things. Mod Podge is also non-toxic and generally safe to use with older kids.
Everyday Iron-on is the one type of HTV that can be used as a base layer and then layer on top of it any other type of heat transfer material.
This amazing heat-transfer material outlasts 50 washes and works with the widest variety of base materials. It's easy to add a little personality to everything from T-shirts to totes, home decor and so much more. Use one color or layer up to 4 to create standout designs.
Solution: You are cutting too deep. Try lightening up your pressure of your cut. If you cut too deep, the blade cuts a very thin layer of the backing paper along with your vinyl. So, when you go to weed your vinyl, its easier for the paper to rip off with the vinyl than for the vinyl to detach from the backing.
Warm Peel vs.
For example, Cricut Everyday Iron-on is “Cool Peel.” This means that you must allow the shirt to cool to the touch before removing the plastic liner. If you remove the liner while it's still warm, the iron-on vinyl may not adhere correctly.
However, you must ensure that the iron is hot and that the paper is still very hot when it is lifted so peel the paper immediately with no delays. Iron on transfers can last for an amazingly long time.
When working with heat transfer vinyl, the shiny side of the material always goes face down for cutting. This shiny side is called the “carrier.” It covers the face (the colored side that will face out on the garment) of the HTV and holds the cut pieces in alignment during cutting and applying.
Permanent vinyl is the best vinyl of choice for long-lasting and outdoor applications like car bumper stickers. Also, permanent vinyl is best used for drinkware that needs to be washed often. It is used to print on mugs, tumblers, wine glasses, and many more.
Cricut Premium Vinyl - Permanent is ideal for projects that need to weather the storm, from mailboxes to mugs, to outdoor signage and more. It's a water-resistant and UV-resistant film with an adhesive that can last for up to 3 years. Find cutting and application instructions below.
You can tell the only difference between permanent or removable vinyl is through its finish. Usually, permanent vinyl has a glossy or shiny finish. While removable vinyl has a matte or dull finish.
Will permanent vinyl peel off?
The simplest way to keep your adhesive vinyl from peeling is to ensure the area you want to apply your decal to is clear of crumbs, dirt, or bumps. Oils from your hands create a residue that makes your decal peel as well. Also, any dirt or foreign objects on the surface can lead to peeling.
What surfaces can you use permanent vinyl on? Both removable and permanent vinyl is best used on any smooth surface. You can place permanent vinyl on surfaces like glass, metal, plastic, acrylic, painted wood, or even notebooks. Permanent vinyl cannot be used on fabrics.
Yes, permanent vinyl can be washed. When putting vinyl on merchandise like mugs or glass, it is recommended to use permanent vinyl. Permanent vinyl is water-resistant and is advised to be washed by hand.
The top choice for permanent adhesive vinyl is the Oracal 651 Craft Vinyl Roll. This product is designed to stick to most flat surfaces, including wood, metal, glass, and walls. It's incredibly thin, measuring just 0.6 mm thick, making it very easy to weed and transfer.
The permanent types of vinyl are waterproof and they last up to three years. The permanent adhesive vinyl is ideal for outdoor application.
This usually happens due to a lack of pressure at the time of pressing. We usually adjust the time and temperature correctly but increase the pressing time if the HTV doesn't stick. Instead, we should increase the pressure. The heat press works by adjusting the time, temperature, and pressure.
Transfers truly are permanent. Infusible Ink products must be applied to a compatible Infusible Ink blank* (t-shirts, tote bags, coasters and mugs to name a few!)
Now when you're customizing crafts using a permanent vinyl, you may ask yourself: Do you mirror permanent vinyl? Let's cut to the chase and not confuse ourselves: No, you do not mirror permanent vinyl on the design space. You never mirror adhesive vinyl.
Solution: You are cutting too deep. Try lightening up your pressure of your cut. If you cut too deep, the blade cuts a very thin layer of the backing paper along with your vinyl. So, when you go to weed your vinyl, its easier for the paper to rip off with the vinyl than for the vinyl to detach from the backing.