Get paint off Wood with Citristrip, Vinegar, Heat Gun and Easy-Off (2024)

Removing old paint from wood is normally a very arduous task. Anyone who has stripped paint knows that it’s not a one step process.

Trying to decide whatproducts to use to strip woodwith can also be challenging. Do you use a toxic chemical stripper or a non toxic one? Which ones work the best?

Today I’m doing a little experiment. I’ve always wanted to compare a few paint stripping methods and see which one I like the most. Two of these methods I’ve used before and two I haven’t. You’ll be shocked to see which one works the best (I was!).

Disclosure; this post contains affiliate links. As an Amazon Associate I earn from qualifying purchases. This does not affect the price you pay. This disclosure statement refers to the rest of the amazon links and other affiliate links in this post.

I have an old painted cabinet in ourkitchen nook. It was painted with a generic white latex paint. I wanted to strip the top of the cabinet (get rid of the old finish) and leave the base white. I thought it would be fun to experiment with a few different methods to strip paint and see which works best.

The cabinet is mostly solid wood but the top of the cabinet has a laminate veneer type of finish. The top flat surface is what I will be stripping the paint off of today.

Table of Contents

Stripping paint off wood Furniture with four different methods

I used aheat gun,white distilled vinegar,Easy-Off oven cleanerandCitristripto attempt to remove paint from the top of this wood veneer cabinet. I spent the same amount of time and “elbow grease” with each product trying to remove the paint (about 20 minutes). You can see which method works the best below.

I divided the cabinet top into four sections withpainters tape. Each small area was easy to work with a compare to each method.

Get paint off Wood with Citristrip, Vinegar, Heat Gun and Easy-Off (1)

Removing paint from wood with Citristrip paint stripper

Citristrip paint stripper is my go-to paint remover product. I previously wrote a post onhow to strip furnitureand I used Citristrip to remove the finish off an old vintage desk. One thing I love about it is that it doesn’t have the harsh fumes that other paint strippers haveandit’s just as effective. It did a beautiful job of bringing out the wood grain and gave the old desk a lovely raw wood finish or raw wood look.

How to apply Citristrip to get paint off wood

There are a few ways to apply Citristrip paint stripper. One is by applying a thick, liberal coat of the gel over the surface and let it dry for at least a few hours. The longer you let it sit, the better. The other way you can apply it is with the Aerosol spray can.

I’m sharing how to remove white paint with the Aerosol version of Citristrip. In a nutshell, I sprayed a very liberal amount of Citristrip on the top of the cabinet and let it sit over night. Yes, I let it sit for over 10 hours. In my experience, the longer you let paint stripper work the better.

Tip; try using plastic wrap to wrap the surface where you applied the stripper. This helps loosen the paint even better.

After 10 hours, I used a plastic scraper to scrape away the layers of paint. Was it totally successful? Not 100%. I still had a sticky white residue left on the surface which meant I needed to use mineral spirits and steel wool to clean it and then potentially spray it with Citristripagainand wait a while. Womp womp womp.

Get paint off Wood with Citristrip, Vinegar, Heat Gun and Easy-Off (2)

Pros and cons of removing paint with Citristrip paint stripper

Pros:

  • Breaks the paint down layer by layer
  • Easy to apply with the aerosol can
  • No harsh fumes but still toxic
  • Very effective at removing paint

Cons:

  • Takes a while to remove the paint (at least a few hours)
  • Leaves a sticky residue that requires mineral spirits, TSP, etc. to remove it
  • Be cautious because it will irritate anything it touches including your skin

How to remove paint from wood with white vinegar

Heat a bowl ofwhite distilled vinegarin the microwave for 30 second and liberally apply (with a brush or a rag) a decent amount of vinegar over the surface. Make sure to let the vinegar puddle! After 15 minutes, use a plastic scraper or putty knife to remove the paint.

Is vinegar successful at removing paint?

Vinegar is successful at removing small areas of paint, but it’s not entirely effective at stripping a large surface of paint. Vinegar is a great non toxic method to remove paint drips and paint splatters. It’s not recommended to remove paint off an entire piece of furniture.

Would I recommend Vinegar for removing paint from wood?

Honestly, no. I’ve tried it twice and I don’t think I will use it again. That being said, I will probably use it sparingly to remove paint drips and it might be a good non toxic option for removing products like acrylic paint.

Pros and cons of removing paint with vinegar

Pros:

  • Non-toxic, natural alternative to using harsh chemicals
  • Household item that is readily available
  • Won’t damage any other surface

Cons:

  • Not very effective at removing paint from large areas
  • Takes patience and a lot of scraping to remove paint
  • Might take a few different applications to remove all the paint
Get paint off Wood with Citristrip, Vinegar, Heat Gun and Easy-Off (3)

How to remove paint from wood with Easy-Off oven cleaner method

Easy off oven cleaner is a fairly new technique that works to remove paint just like it does dirt and grime in your oven. It loosens the paint from the surface so you can easily wipe it away.

The instructions said to spray a liberal amount of cleaner on the surface and let it sit for over an hour. That is what I did!

Once an hour had passed I used a wet sponge and warm water to wipe the surface. To my utter surprise, the paint wiped away with no problems! I didn’t even have to use mineral spirits or TSP to clean the surface because it’s already clean!

I couldn’t believe my eyes! I was really thinking this wasn’t going to work well at pulling up the paint. I was wrong!

Get paint off Wood with Citristrip, Vinegar, Heat Gun and Easy-Off (4)

Pros and cons of removing paint with Easy-Off oven cleaner (Do I dare say furniture stripper?)

Pros:

  • Easy to use. Spray it on and wait an hour then wipe away the paint
  • Doesn’t create a sticky residue like other paint removal methods
  • Wipes away easily with a damp sponge
  • Cleans the surface as it removes paint
  • Quickest way to remove paint from wood

Cons:

  • Not intended to be used to remove paint
  • Toxic so needs to be used in a well ventilated area with protective gear

How to remove paint from wood with a heat gun

SAFETY TIP: Make sure you are not removing lead paint! The heat gun will vaporize toxic fumes if you do, so be 100% sure it’s free of any leaded paint.

While holding the heat gun about 1 inch away from the surface, move it around in circles or back and forth slowly. After a minute (or a few seconds depending on the paint), use a paint scraper to see if you can scrape the paint.

The heat gun acts to melt away the paint (or separate it from the surface) allowing you to scrape it away.

For me, I had to move the heat gun for a few minutes before it allowed me to scrape any paint away.

As long as you are moving the heat gun around and not staying in one place for long, you shouldn’t have to worry about burning the wood.

This method for removing paint is the most time consuming. It can also be the most messy, especially if the paint doesn’t pull up in large chunks.

Can you use a hairdryer to remove paint from wood?

A hairdryer will work the same way a heat gun will, it just won’t get as hot. There are a few different schools of thought on this. Some experts say it’s best to use a hairdryer (and even a heat gun) on a low heat and low speed setting. The reason for this is that it helps loosen the paint slowly and prevents it from “melting.”

From a personal experience, I’ve never had any luck with using a hairdryer or a heat gun on a low setting and speed to remove paint. I feel like there is a “sweet spot” to creating enough heat to loosen the paint while not melting it. Unfortunately, I haven’t been successful in finding this with a heat gun OR a hairdryer. Maybe I’m just impatient.

Honestly though, why take hours to remove paint from flat surfaces with a heat gun when there are quicker methods? This is why I would suggest using this method for small areas only.

Pros and cons of removing paint with a heat gun

Pros:

  • No harsh chemicals
  • Can loosen latex paint effectively if set at the right temperature

Cons:

  • Can possibly melt the surface if you’re not careful
  • Leaves a sticky melted residue (melted paint) if you aren’t careful with the heat settings
  • Takes time and patience
Get paint off Wood with Citristrip, Vinegar, Heat Gun and Easy-Off (5)

What is the easiest way to remove paint from wood?

All four of these methods remove paint from wood furniture. They all just work differently.

In a nutshell, Iwouldn’tsuggest using the heat gun method or the vinegar method to strip a large surface area or an entire piece of wood. Iwoulduse these two methods for newpaint drips, paint splatters and small areas.

I would use the oven cleaner and paint stripper to get paint off an entire piece of wood or to strip a furniture piece.

Update: Since this post was written I’ve stumbled on a new favorite (NON TOXIC, ALL NATURAL) paint stripping product. Check outQCS by Stripwell with my full review.Y’all this product is a game changer.

If you want to see more aboutstripping a piece of furniture with Easy Off Oven Cleanercheck out this post. Spoiler alert; it wasn’t as successful as I thought it would be.

Get paint off Wood with Citristrip, Vinegar, Heat Gun and Easy-Off (6)

The Best Paint Stripper:

Overall, the Easy-Off oven cleaner worked the best at removing paint from wood. As you can tell with the pros and cons list; I had an endless amount of pros and only a few cons.

Have you ever used any of these methods before? I’m always open to suggestions and new ideas of how to strip paint off wood. See morepainting and refinishing tipshere!

Thanks for following along!

Lindsey**

Get paint off Wood with Citristrip, Vinegar, Heat Gun and Easy-Off (2024)

FAQs

How to clean up Citristrip with vinegar? ›

For wood pieces, I use warm water, vinegar, and a clean cloth. Take another clean cloth with just water and wipe down before drying with another clean cloth.

Will a heat gun remove paint from wood? ›

Use a Heat Gun

Heated air from the tool is directed onto the painted surface. This causes the paint to loosen, blister and bubble from the wood, making it easy to remove with a metal scraper. Heat guns are also effective at taking off varnish and other finishes.

What is the best homemade paint remover for wood? ›

'To make your own paint remover, simply take a dish or vessel and pour in one part ammonia, one part borax (both naturally occurring elements) and one part washing soda,' Michael says. 'Also add a small amount of water. Two tablespoons is perfect for one cup of each ingredient, so scale up/down from there.

Is removing paint with a heat gun safe? ›

Heating paint can give off dangerous fumes, so always use a heat gun in a well ventilated space and use a suitable respirator face mask. There will be some paint that will be tricky to remove as it has not been warmed sufficiently or is trapped between the grain.

Is a heat gun good for stripping paint? ›

Heat guns are useful tools that can make removing paint from areas such as doorframes, stairs and skirting boards a breeze. However, they can also be dangerous if used without care. In this guide, we take you through how you can safely use a heat gun to remove paint.

What do you clean wood with after CitriStrip? ›

Citrus strippers such as CitriStrip have a wax in them to keep the product from drying out after it's applied to the surface. Mineral spirits is recommended after the stripping solution because it's important to break down those waxes before getting started.

What dissolves CitriStrip? ›

So if you find yourself in a gummy, gunky stripping mess like I did, here is the solution that I figured out through trial and error. The answer to my Citristrip disaster: Denatured Alcohol! Check out that beautiful gunk-free wood!

What is the fastest way to remove paint from wood? ›

Here's how: Using a putty knife, scrape off as much paint as possible. Take a cloth, dip it into a solution of three parts rubbing alcohol and one part lemon juice. Coat the paint in the mixture and leave it to stand for roughly five minutes.

Does vinegar remove paint from wood? ›

Does vinegar remove paint from wood? Vinegar will not remove paint from wooden furnishings but it will soften it making it easier to remove with scrubbing. Nolan adds that 'Denatured alcohol will remove latex paint in small quantities.

What is the cheapest way to remove paint from wood? ›

Caustic paint removers take off most finishes and are particularly good at getting rid of thick layers of paint and varnish. They give off fewer fumes than solvent-based paint strippers, are cheaper and tend to work faster.

How do professionals remove paint from wood? ›

Three common ways to strip paint from wood are heating, chemical stripping, or sanding. There are a handful of different products to choose from for each of these methods.

How to remove paint from wood without damaging the wood? ›

The best way to remove paint from wood furniture without damaging it depends on the type of paint and finish. Try using a paint stripper or a heat gun to soften the paint, then gently scrape it away with a putty knife or scraper.

What can I use to scrape off CitriStrip? ›

On projects where a water-based product will be used, we recommend cleaning with Acetone which evaporates quickly and removes any residue. After using Acetone, wash with the 50:50 mix of denatured alcohol and water.

Do I need to wear a mask when stripping paint with a heat gun? ›

PPE is vital to protect yourself from the heat and any debris produced. A mask, eye protection, gloves, and protective clothing are essential. Once you have tested for lead and are satisfied the paint is safe, prepare the area. Remove anything nearby which is flammable; heat guns can get very hot.

How can I make CitriStrip more effective? ›

Step 1 Apply Liberally

CitriStrip needs a thick coat to work effectively. Too thin and it will dry out and stop working. I generally apply a coat of stripper using a disposable chip brush about 1/8″ thick. The best way to judge that you have enough is if the surface is mostly the orange color of the stripper.

Top Articles
Latest Posts
Article information

Author: Laurine Ryan

Last Updated:

Views: 6492

Rating: 4.7 / 5 (57 voted)

Reviews: 80% of readers found this page helpful

Author information

Name: Laurine Ryan

Birthday: 1994-12-23

Address: Suite 751 871 Lissette Throughway, West Kittie, NH 41603

Phone: +2366831109631

Job: Sales Producer

Hobby: Creative writing, Motor sports, Do it yourself, Skateboarding, Coffee roasting, Calligraphy, Stand-up comedy

Introduction: My name is Laurine Ryan, I am a adorable, fair, graceful, spotless, gorgeous, homely, cooperative person who loves writing and wants to share my knowledge and understanding with you.