How do we stop people from blinding other drivers with aftermarket LEDs? (2024)

dim dimmer —

Good headlights make you safer, but bad ones actively hurt other road users.

Daniel Gray -

How do we stop people from blinding other drivers with aftermarket LEDs? (1)

It might be stating the obvious, but your car's headlights are a safety device, and not all headlights are created equal. For a while, carmakers have been fitting powerful LED headlights to their high-end offerings, but more often than not, their cheaper cars—and particularly cheaper trim levels—get saddled with much-weaker illumination. But sometimes a commuter wants to see more of where they're going when the sun goes down. Eventually, they go looking for a solution, starting with their local automotive parts store. But stuffing aftermarket LED headlight bulbs into OEM housings designed for conventional halogen units results in dangerous glare for oncoming drivers. While LEDs can deliver more intense light at a higher end of the spectrum, most aftermarket units also create a hazardous condition.

The major brick-and-mortar auto parts stores know this, which is why they tend to shy away from aftermarket H11 LED bulbs, other than ones clearly marked for use in fog lamps or "for off-road use only." It's a different world online, with off-brand H11 LED bulb listings on Amazon, eBay, and Walmart websites failing to carry the same prominent warnings.

You can get pulled over for non-spec headlamps, and for a good reason. In addition to issuing a citation, the law enforcement officer may have the legal right to force you to remove the bulbs. More ominously, once the officer has pulled you over, you risk a vehicle search. With all that in mind, it would be wise to keep a set of securely packaged OEM bulbs in the glovebox or trunk if you are running aftermarket LEDs.

With LED technology rapidly evolving, the industry in a constant beta-test state. While the lighting giants are incredibly cautious in bringing new products to the market, as drivers we're all guinea pigs on four wheels for off-brand manufacturers that spin out new bulbs like chickens lay eggs. The lack of regulation enforcement and objective, independent testing puts lives at risk.

OEM leverage, yes. Aftermarket? No.

Although Consumer Reports tests new vehicle headlamps, it hasn't tackled the topic of LED replacement bulbs, despite Consumer Reports' extensive resources. A comprehensive Consumer Reports aftermarket LED replacement bulb test would go a long way to bring clarity to the market. Consumer Reports' testing of conventional replacement bulbs found that while aftermarket units can improve headlight brightness, there's much more to it than that. "Distance and how far a headlight illuminates is governed more by the reflector (behind the bulb) or the lens (ahead of the bulbs). While you can change the bulb, you are not changing the distance, i.e., not necessarily improving safety."

Further Reading

This institute crash-tests cars to make us all safer

High-end headlights are now a must if an automaker wants the coveted Insurance Institute for Highway Safety (IIHS) Top Safety Pick+ designation for a particular model of car. While IIHS performs exhaustive headlamp testing with new cars and SUVs in their laboratory and test track, it does not have an official position on aftermarket replacement bulbs for older vehicles. The IIHS recommends that you make your vehicle purchase decisions carefully, considering not just the make and model but the specific trim level.

What can you do?

Do your lighting research before you make your next vehicle purchase. Headlamp technology has typically been bundled with the trim level. The base model would get fitted with reflector headlamps, with projectors offered in the mid-range and higher trim levels. Adaptive headlights have been the preserve of the top trim levels. All that means that less-expensive vehicles are often stuck with reflectors across the range in America. (IIHS recently changed its testing rules and will now only give its coveted Top Safety Pick+ to models that offer the best headlights across all trim levels.)

The Ford Fiesta is a case in point. While self-leveling projector headlamps are available in the Fiesta ST overseas, Ford saddled domestic Fiesta STs with poorly performing reflectors.

Fiesta owners got stuck between a rock and a dark place. While they can adapt an expensive imported OEM projector housing, those housings lack side marker lights, making them illegal for domestic use. The lack of a proper solution forces Fiesta ST owners looking for LEDs to stuff LED replacement bulbs into the original reflector housings, for better or for worse.

Although bulb replacement is relatively quick and easy, the crucial process of beam alignment often gets overlooked. Consumer Reports stressed that "headlamp alignment is key to limiting/controlling glare to oncoming and followed drivers."

LED bulbs make the problem worse. While halogen filaments deliver 360-degree illumination, LED bulbs typically emit light with a pair of back-to-back 180-degree planes. When LED alignment gets skipped, oncoming drivers are blinded, as are drivers ahead of them in traffic. Poorly aimed headlamps are especially bothersome with pickup trucks and SUVs due to the vehicle height.

If you choose to install aftermarket LEDs, do your homework. Find a reputable manufacturer and domestic retailer. Buy based on quality, not price. The optimal LED replacement bulbs mimic OEM halogen filament bulbs as closely as possible. The worst bulbs are a stab in the eyes. And don't skip alignment—take your time and do it right.

Is enforcement from Washington, DC inevitable?

Aftermarket LED replacement bulbs are illegal, but there's little enforcement at the federal level. We checked in with NHTSA and a spokesperson told us the following:

"There are currently no LED headlamp replaceable bulbs that meet federal safety standards. NHTSA is aware of illegal retrofit kits that are being sold to consumers and works closely with US Customs and Border Protection to prevent shipments containing these non-compliant headlamp bulbs from entering the United States. NHTSA continuously researches emerging technologies with the potential to enhance roadway safety."

The legit aftermarket industry wants to do the right thing. As an example, Holley recently introduced a line of Bright Earth LED replacement headlamp bulbs. Holley's online sales pages include a proper and prominent disclaimer:

WARNING: THIS REPLACEMENT LED HEADLIGHT BULB SET IS SOLD FOR OFF-ROAD USE ONLY. This product should not be used on the road. This product has not been tested for compliance with United States Federal Motor Vehicle Safety Standard FHMVSS 108 or Canadian Standard CMVSS108. It should not be used on the road or in any other application requiring compliance with FHMVSS 108, CMVSS108, or Title 49 section 571.108, United States Code.

The biggest online retailers need to catch up. While some sellers include a disclaimer that aftermarket LED bulbs shouldn't be used on the street, Amazon sales pages do not.

How do we stop people from blinding other drivers with aftermarket LEDs? (2024)

FAQs

How can you avoid blinding other drivers? ›

Turn your brights off until you complete the curve to prevent the possibility of blinding the other driver. At intersections and stop signs. Although it may appear that no one is around, you could wind up blinding or distracting drivers on the crossing roads.

How can you prevent being blinded by the headlights of other vehicles? ›

Keep your eyes moving and scan the area.

Don't just focus on the middle of the lighted area in front of you and continually scan the area for oncoming lights and vehicles. Be aware of hilltops, curves and intersections.

Do LED lights blind other drivers? ›

When choosing LED headlight bulbs, it's important to make sure you're not accidentally blinding other drivers on the road. To avoid this, make sure to choose bulbs with the right color temperature – between 3000K and 6000K is generally considered safe.

Why are aftermarket LED headlights illegal? ›

Headlights that register 3,000K or 3,000LM are the brightest headlights you can legally install in your car. Anything beyond that level is typically against the law and you run the risk of blinding another driver and causing an accident.

What is a good strategy to avoid being blinded when an oncoming vehicle keeps its bright headlights shining directly at you? ›

Don't look directly at the headlights of oncoming traffic. Avert your eyes to the lane in front of you, keeping them to the right of the lane but still focusing on the road. Use lane reflectors to guide your path on the road, as it may become harder to see from the bright headlights.

How to avoid being blinded by headlights of oncoming cars look as far ahead as possible at the right edge of the roadway? ›

Do not look directly into the oncoming headlights. Look toward the right edge of your lane. Watch the oncoming vehicle out of the corner of your eye.

How do I protect my eyes from LED headlights? ›

Buy blue light blocking glasses

They're affordable and available in a variety of locations.

Why do LED headlights blind me? ›

When drivers are exposed to the centre of a LED headlight beam their pupils quickly constrict to adjust to the bright light. But the dilation of the drivers' pupils to readjust to darkness happens more slowly, meaning people 'drive blind' for a time.

How do you avoid being blinded by oncoming cars at night? ›

To avoid being blinded do not look directly at oncoming headlights. Instead look to the right edge of your lane and watch the oncoming car out of the corner of your eye. A couple of other brief points, never drive with just your parking lights on.

Are aftermarket headlights legal? ›

As long as the headlight is labeled as DOT or SAE approved, it is legal to operate in all 50 states. Taillights are also subject to brightness limitations, but as they must be red in color, taillights rarely violate these limits. Just ensure that any custom, aftermarket taillights are DOT or SAE approved.

Do LED headlights blind oncoming drivers? ›

LED bulbs make the problem worse. While halogen filaments deliver 360-degree illumination, LED bulbs typically emit light with a pair of back-to-back 180-degree planes. When LED alignment gets skipped, oncoming drivers are blinded, as are drivers ahead of them in traffic.

Are aftermarket LED bulbs legal? ›

As we conclude this article – aftermarket LED bulbs are not road legal according to the Road Vehicles Lighting Regulations as they are not E marked. MOT testing centres will now fail LED upgrade bulbs in your headlights but the guidelines state nothing about other LED bulbs in your vehicle.

What states are LED headlights illegal? ›

Though drivers can mistake them for high beams, Ortiz said LED lights are legal in California. “Most new vehicles are sold with them,” Ortiz said.

Is 6000K legal for headlights? ›

The CCR specifically states that “no vehicle may be equipped with a lamp that emits a blue light” (CCR 25600). In a word, it they are aftermarket upgrades, they should have a white color temperature ranging between 5000K – 6000K and should not be positioned too high or too low from the ground.

Are 8k headlights illegal? ›

Xenon HID bulbs with a high colour temperature - such as 8000K or above - are sometimes not road legal. Halogen bulbs with a colour temperature of 4300K or over also tend to be non-road legal.

How can you avoid temporary night blindness from other drivers lights CDL? ›

Quote From The CDL Manual:

Dim your lights before they cause glare for other drivers. Dim your lights within 500 feet of an oncoming vehicle and when following another vehicle within 500 feet.

How can a driver avoid being a distraction to others? ›

Avoid texting, eating, grooming or calling someone while behind the wheel. Plan your route before you go. Programming your navigation system while you drive can take your eyes off the road. It's better to ask a passenger to do it or to enter your destination before you leave home.

How do you beat blinding sunlight while driving? ›

Driving With a Sun Glare: Tips You Need to Know
  1. Slow Down. The first rule of driving through a sun glare is to slow down - way down. ...
  2. Put More Room Between Yourself and Other Vehicles. ...
  3. Figure Out a Sun Glare-Free Route or Time. ...
  4. Wear Polarized Sunglasses While Driving. ...
  5. Tint the Windows. ...
  6. Keep the Windshield Clean.

What are some things that will prevent you from seeing while driving? ›

From a dirty windshield/windows to overgrown vegetation along the roadway, all can block your view and line of sight, inhibiting your ability to see well. Poor roadway design.

Top Articles
Latest Posts
Article information

Author: Moshe Kshlerin

Last Updated:

Views: 5986

Rating: 4.7 / 5 (57 voted)

Reviews: 88% of readers found this page helpful

Author information

Name: Moshe Kshlerin

Birthday: 1994-01-25

Address: Suite 609 315 Lupita Unions, Ronnieburgh, MI 62697

Phone: +2424755286529

Job: District Education Designer

Hobby: Yoga, Gunsmithing, Singing, 3D printing, Nordic skating, Soapmaking, Juggling

Introduction: My name is Moshe Kshlerin, I am a gleaming, attractive, outstanding, pleasant, delightful, outstanding, famous person who loves writing and wants to share my knowledge and understanding with you.