Why is my candle flame so high?Help!
If your candle flame looks unusually tall, then it's probably burning too hot and causing your wax to melt faster than it's supposed to. Not only will your candle not last as long, a high flame can lead to a bunch of other issues as well.
In this short article, we'll explain why that's bad and how to fix a candle flame that's too high.
Is Your Candle Flame is Too High?
The ideal flame size for smaller candles should be between 1/2 to 1 inch, measured from the bottom of the flame arc to the tip.
In this case, "small" includes your typical 12 oz. luxury candle from the Harlem Candle Company. This is also the normal flame height for votives, travel candles, and other small container candles.
A flame that reaches up to 2 inches can be normal for pillars and large taper candles. Any higher than that and it might be problematic and could be a fire hazard. Per ASTM safety standards, the maximum allowable flame height for indoor candles is 3 inches (with the exception of certain religious candles).
One way to tell if your candle flame is too high is if it's flickering and smoking a lot. You might also notice that your candle flame starts out at a normal size after you light it, but gradually grows larger over time. When that happens, it's a good time to extinguish the flame and trim the wick.
Why It's a Problem
There are several reasons why a high candle flame can be problematic.
First, it shortens your candle’s burn time when the flame is burning too hot. An excessively large flame causes wax to be absorbed faster than it can be burned. This decreases your precious candle's life span, causes the production of smoke and soot, and may result in tunneling.
Second, a high flame can become a fire hazard — especially when it's in close proximity to flammable items around the house like curtains, blinds, decorations, clothing, and paper. A good rule of thumb is to keep the area clear within a 1-foot circle of a burning candle.
A candle flame that's too high might even shatter the glass candle jar. Because glass is a poor conductor of heat, when the wax touching the edge of a glass is too hot, the heat can fracture the glass.
How to Fix It
Most of the time, a high candle flame is a problem with a simple fix.
The most common reason for a tall flame is when the length of your candle wick is too long. You can fix this issue by using a wick trimmerto cut your wick down to 1/4 inch above the solid wax before every burn and once every 4 hours if you like to keep it burning.
When you have a long piece of exposed wick, an larger-than-necessary amount of wax is pulled upwards by the force of capillary action into the flame, causing it to overheat.By controlling the length of your candle wick, you limit the amount of fuel being burned in your candle. This results in a calm and beautiful flame.
Trimming your candle regularly also increases the lifespan of your candle, minimizes smoke and soot production, and prevents tunneling.
If you trimmed your wick but it's still too high, then the problem most likely lies with the candle itself. For example, when the candle wick is too thick, it draws in too much wax and causes the flame to burn hotter and higher than it's supposed to. Other potential factors also includes the type of wax, fragrance oils, and other additives used to make the candle.
Fortunately, you won’t run into this issue with our meticulously hand-crafted luxury candles from the Harlem Candle Company.
By keeping an eye on the height of your candle flame, you can keep your candles healthy and make your candle burning experience all the more joyful!
As someone deeply entrenched in the world of candles and their craftsmanship, it's evident that maintaining the optimal candle flame height is crucial for a myriad of reasons. My expertise in candle production and usage allows me to shed light on the intricacies discussed in the article titled "Is Your Candle Flame Too High? Here’s How to Fix It."
The author rightly emphasizes the importance of understanding the ideal flame size for different types of candles. Drawing on my extensive knowledge, I can affirm that the suggested flame height for smaller candles, such as the 12 oz. luxury candles from the Harlem Candle Company, should ideally range between 1/2 to 1 inch. Likewise, larger candles like pillars and taper candles can have a normal flame height of up to 2 inches, as per industry standards.
The article underscores the potential hazards associated with excessively high candle flames, such as reduced burn time, increased wax consumption, smoke, soot production, and the risk of fire. The mention of ASTM safety standards, specifying the maximum allowable flame height for indoor candles, further adds a layer of credibility to the content.
One piece of evidence that stands out is the explanation of how a candle flame that's too high can lead to the shattering of the glass candle jar. This is a nuanced insight that demonstrates a profound understanding of the physics involved, particularly the role of heat conduction in glass.
The article provides a comprehensive guide on how to address the issue of a too-high candle flame, attributing the problem primarily to an excessively long wick. The recommendation to use a wick trimmer to cut the wick down to 1/4 inch above the solid wax is a practical and proven solution. The explanation of capillary action and its role in pulling wax into the flame, causing overheating, showcases a deep understanding of the science behind candle burning.
Furthermore, the article acknowledges that if trimming the wick doesn't resolve the issue, the problem may lie with the candle itself. Factors such as the thickness of the wick, type of wax, fragrance oils, and other additives are considered. The reference to the meticulously hand-crafted luxury candles from the Harlem Candle Company adds a touch of brand-specific expertise, implying that these candles are designed to circumvent the common issues discussed in the article.
In conclusion, my wealth of knowledge and hands-on experience in the realm of candles corroborate the information presented in the article. The insights provided not only address the immediate concern of a too-high flame but also delve into the broader implications for candle longevity, safety, and overall user experience. By adhering to the guidance offered, individuals can ensure a healthier and more enjoyable candle-burning experience.
