Jam recipes (2024)

FAQs

What is the ratio of sugar to fruit when making jam? ›

The amount of sugar you need to make jam depends on the amount of pectin in your chosen fruit, but generally the fruit-to-sugar ratio for traditional jams is 1:1 (ie. 450g/1lb sugar to 450g/1lb fruit).

Jam recipes mostly comprise equal weights of fruit and sugar. You can play with this 1:1 ratio as much as you want, but too much fruit and you may lose the preserving effects of the sugar; too much sugar and it may crystallise during storage.

The Magic of Macerating

One of my favorite tricks for jam-making is macerating the fruit first. Macerating is the process of coating the fruit in sugar and letting it rest for a few hours or overnight, which pulls some of the juice out of the fruit and creates a syrup with the sugar.

Since pectin is activated by sugar, it requires using a considerable amount of sugar to activate the pectin and set (i.e. thicken) your jam. If you try to cut back on the sugar, it won't set properly.

5. Do Not Stir Once Mixture Is Boiling. Once your jam/marmalade it has reached a rapid rolling boil do not stir it. Stirring it will alter the temperature of the jam/marmalade meaning it will take longer to reach the setting point.

Adding acid in the form of fresh lemon or lime juice is important for two reasons: First, it makes for a more well-balanced jam, returning some of the acidity lost with the addition of sugar. Second, pectin needs acid to properly activate, or firm up.

Add the butter, which will help disperse any foam which is a natural part of jam making. The butter helps minimise this, and disperses any foam back into the jam. Bring to a rapid, rolling boil for four minutes. Don't be afraid of the rolling boil, this is crucial to producing a jam that will set.

If, on the other hand, the jam is rock solid, that means you've gone too far and cooked it too long. You can try adding a little water to thin it out, but bear in mind that after overcooking a jam, you can't really get those fresh fruit flavors back.

Less sugar may allow for greater bacterial growth. As a result, process times may be longer for these low-sugar or no-sugar jams and jellies. Some pectin products include preservatives to reduce bacterial growth, as well as to preserve color.

Can you reboil jam if it doesn't set? ›

If you've made jam and waited for it to cool, but it is still runny, pour the jam back into a saucepan and bring it back to a boil. Boil until the jam starts to reduce and therefore thickens.

Some of my favourite jam flavours are mixed berries, peach and cherry. This jam recipe is made without pectin. Cornflour (or cornstarch) combined with lemon juice is a great alternative to pectin. It thickens up jam really well, combined with the sugar and heat.

The ratio between fruit and sugar varies: with sweet fruits, it's about 2:1 (2 kilos of fruit, 1 of sugar), while with more bitter fruits like oranges, it should be more like 3:2. If uncertain, it's better to round up with the sugar.

Jam is regulated by the FDA; it must come from a single fruit and contain at least 45% fruit and 55% sugar.

To Make Jelly: Use no more than 6 to 8 cups of extracted fruit juice at a time. Double batches do not always gel properly. Measure juice and sugar. When a recipe is not available, try using ¾ cups sugar for each 1 cup of juice.

It can be prepared from one kind of fruit or from two or more kinds.In its preparation about 45% of fruit pulp should be used for every 55% of sugar. The FPO specification of jam is 68.5% TSS, 45% of fruit pulp and 0.5-0.6% of acid (citric acid) per 100 gm of the prepared product.