Summer Mold Prevention TIps | Kelmann Restoration (2024)

Summer Mold Prevention TIps | Kelmann Restoration (1)

During the humid summer months, mold can be an unwanted guest. Taking the steps to prevent mold before it can grow out of control is essential. We’re already partway through the summer, but there are things we can do and change to protect our home from mold damage. Stopping mold before it starts, or even in its beginning stages, before it has the chance to grow, will help prevent a greater problem down the road.

Keep your Home Clean

Keeping your home clean is important for a number of reasons. The number one thing mold needs is moisture. Once it has this, it can easily grow on a number of surfaces within the home. Regular cleaning of these areas can be instrumental in preventing mold from growing. Cooking oils, soap scum, and dirt can all facilitate mold growth. Eliminate these elements from the home through regular cleanings.

Control Humidity

Summer Mold Prevention TIps | Kelmann Restoration (2)

Because mold needs water to grow, humidity in the home can be detrimental. This can be an especially big problem during the summer months when humidity in the air is especially high. Whether the moisture is coming from outside air, water coming in, cooking, showering, running the dishwasher, or even breathing, it is important to reduce the amount that remains in the home. Wipe away excessive moisture on the walls and ceiling. Make sure fans in the kitchen and bathroom are functioning properly to remove the moisture. For those living in especially humid areas, investing in a dehumidifier may be necessary.

Control the Temperature

For mold to grow, the ideal temperature needs to be reached. The ideal temperature is between 77 and 86 degrees Fahrenheit. During the summer months, temperatures are often higher than normal inside the home. Make an effort to keep temperatures inside the home lower during the summer months. Setting the thermostat to the low 70s makes it more difficult for mold to grow. Be conscious of the temperature of your home. Even if you are away from your home for an extended period of time, keep the temperature fairly low to prevent against mold.

Keep Air Circulating

Stagnant air breeds mold. Keeping air circulating through your home will help prevent mold from growing. Keep all the vents in your home open, even if you don’t often go in that room.

Protect your home against mold, even during the humid summer months. By keeping your home clean, controlling the humidity, controlling the temperature, and keeping the air circulating, you can better prevent mold from growing in your home.

4.4 12 votes

Article Rating

Subscribe

0 Comments

Inline Feedbacks

View all comments

See Also
mold
Summer Mold Prevention TIps | Kelmann Restoration (2024)

FAQs

Summer Mold Prevention TIps | Kelmann Restoration? ›

Keep all the vents in your home open, even if you don't often go in that room. Protect your home against mold, even during the humid summer months. By keeping your home clean, controlling the humidity, controlling the temperature, and keeping the air circulating, you can better prevent mold from growing in your home.

How to prevent mold in the summer? ›

Preventing Summer Mold
  1. Clean Your House Regularly. ...
  2. Perform Preventive Maintenance. ...
  3. Clean Your Filters. ...
  4. Control Humidity. ...
  5. Control the Temperature of Your Air Conditioner. ...
  6. Keep Air Circulating. ...
  7. Dry Your Bathroom After Use. ...
  8. Pay Attention to Appliances.

How to prevent mold from coming back? ›

Rubino shares how to best reduce mold growth and prevent it from coming back.
  1. Step 1: Maintain your HVAC air filters. ...
  2. Step 2: Clean regularly — especially in high-moisture areas. ...
  3. Step 3: Keep moisture levels low. ...
  4. Step 4: Invest in air purification.
Aug 22, 2023

How do you clean mold and keep it from coming back? ›

How to get rid of mold
  1. Chlorine bleach. Sodium hypochlorite (aka basic household bleach) is effective for destroying mold. ...
  2. Hydrogen peroxide. ...
  3. Distilled white vinegar. ...
  4. Baking soda. ...
  5. Microban 24 Multi-Purpose Cleaner.
  6. This stuff prevents the growth of mold and mildew for 7 days after use on hard surfaces.*

What does mold hate? ›

Sunlight and fresh air are about as “anti-mold” as it gets, plus it's easy to do.

What are 3 ways to prevent mold? ›

Here are several ways to curb moisture indoors, and the mold that thrives on it.
  • Identify Problem Areas in Your Home and Correct Them. ...
  • Dry Wet Areas Immediately. ...
  • Prevent Moisture With Proper Ventilation. ...
  • Equip Your Home With Mold-Resistant Products. ...
  • Monitor Humidity Indoors. ...
  • Direct Water Away From Your Home.

What stops mold from forming? ›

Preventing mold is as easy as monitoring the day-to-day humidity levels of your home. The EPA recommends a humidity between 30 percent and 50 percent to inhibit mold growth. If your home's humidity exceeds 60%, there is a good chance that mold growth will occur.

Do air purifiers help with mold? ›

Air purifiers may help remove common allergens like mold from the air, providing relief for people with allergies or chronic asthma. They can also aid in removing harmful particles in the air caused by smoke, which can occur during wildfires.

What kills mold spores in the air? ›

Mix a few drops of tea tree oil with water in a spray bottle and spray it in the air to help kill mold spores. Vinegar: Vinegar is an effective natural cleaner that can help kill mold spores. Mix equal parts vinegar and water in a spray bottle and spray it in the air to help kill mold spores.

Are Clorox wipes enough to get rid of mold? ›

Some people recommend using household products like Clorox Wipes, laundry bleach, or vinegar to kill mold. Do they really work? They can if your mold problem is fairly minor. Laundry detergent mixed with very warm water does a good job of cleaning mold off hard surfaces.

How do you get rid of mold permanently? ›

A bleach solution also works to kill mold. Mix one cup of bleach in a gallon of water, apply to the surface and don't rinse. Mix a 50/50 solution of ammonia and water. Spray on the surface, wait two to three hours, then rinse.

Does vinegar stop mould coming back? ›

To kill the mold at its roots: The penetration power of vinegar can help in killing the mold completely and prevent its recurrence.

Is mold worse in the summer? ›

First of all, mold loves moisture and high temperatures. That's why mold season in the US is considered early spring to mid-fall. In the spring, the weather starts to warm up, and there is more moisture in the air. Midsummer is the peak time for mold growth.

What temperature should a house be to avoid mold? ›

Ideally your home should be heated between 18 to 21 degrees Celsius, but older people, babies and people who are less mobile may need it to be warmer. It is important that the tenant helps to reduce the condensation problems by taking steps to limit the amount of moisture produced in the property.

How do I get rid of mold in my summer house? ›

Apply an anti-fungal/pesticide to all the timbers inside the summerhouse; we find PermaGuard works well. Leave the building to air for a day. After that, you may wish to apply some colour to the inside to cover up the staining caused by the blackening.

What temperature to keep your house at to prevent mold? ›

The ideal temperature is between 77 and 86 degrees Fahrenheit. During the summer months, temperatures are often higher than normal inside the home. Make an effort to keep temperatures inside the home lower during the summer months. Setting the thermostat to the low 70s makes it more difficult for mold to grow.

Will mold go away in summer? ›

Many people don't know that mold grows year-round, but it becomes more noticeable in the spring and summer. This is because mold loves moisture, and warm weather creates the perfect environment to grow. Here's what you need to know about mold season and how to keep mold at bay.

Top Articles
Latest Posts
Article information

Author: Errol Quitzon

Last Updated:

Views: 5963

Rating: 4.9 / 5 (79 voted)

Reviews: 94% of readers found this page helpful

Author information

Name: Errol Quitzon

Birthday: 1993-04-02

Address: 70604 Haley Lane, Port Weldonside, TN 99233-0942

Phone: +9665282866296

Job: Product Retail Agent

Hobby: Computer programming, Horseback riding, Hooping, Dance, Ice skating, Backpacking, Rafting

Introduction: My name is Errol Quitzon, I am a fair, cute, fancy, clean, attractive, sparkling, kind person who loves writing and wants to share my knowledge and understanding with you.