Time After Time Skilled Clock Makers, Clock Repairs, Gears, Windings, Clockmakers, Restorers (2024)

Mantel & Bracket Clocks with pendulums

Mantel and bracket clocks fall into two basic categories. Those with pendulums and those without. In the case of pendulum clocks it is necessary for the clock to be sited on a stable surface. If the clock is on a rickety piece of furniture or a piece of furniture that sits on floorboards that move when someone walks past then the clock will not run properly. If the case is on a stable piece of furniture, shelf or mantle but is still rocking then this will need to be addressed by packing one of the feet with a wedge or packing piece. It is not critical for the case to be completely level as it is possible to adjust the clock to run on such a surface.

Please feel free to contact me for advice specific to your clock.

Mantel Clocks without pendulums & Carriage Clocks

Mantel clocks without pendulums have a platform escapement or, in the case of some modern clocks, an escapement known as a floating balance. Carriage clocks as their name suggests are designed to be portable time keepers and as such, have no special requirement with regard to surface. Clocks with a floating balance escapement, while not portable like carriage clocks have no special requirement for the surface to be level or stable.

Please feel free to contact me for advice specific to your clock.

Time After Time Skilled Clock Makers, Clock Repairs, Gears, Windings, Clockmakers, Restorers (2024)

FAQs

What is the name of a person who repairs clocks? ›

A clockmaker is an artisan who makes and/or repairs clocks. Since almost all clocks are now factory-made, most modern clockmakers only repair clocks.

Can you use WD-40 on clock movements? ›

Never spray anything into the mechanism, and make sure to only use approved products. Products like WD-40 should never be used to oil your clock as they contain traces of water and can cause your movement to stop working, or rust the pivots.

How many times should you wind an old clock? ›

An eight-day clock should be wound once a week, as the mainspring loses power after seven days. A 30-hour clock should be wound daily; a good routine is to wind it every night before bedtime.

What is another name for a clock maker? ›

People interested in horology are called horologists. That term is used both by people who deal professionally with timekeeping apparatuses, as well as enthusiasts and scholars of horology. Horology and horologists have numerous organizations, both professional associations and more scholarly societies.

What profession fixes clocks? ›

Alternative titles for this job include Horologist, clock maker. Watch and clock repairers fix, service and restore customers' timepieces and those held in collections.

What is a clock lover called? ›

Horologist Definition & Meaning - Merriam-Webster.

What should you not use WD-40 on? ›

7 places to never use WD-40 — you'll be surprised
  • Hinges. A lubricant being sprayed on a door hinge. ...
  • Bike chains. Someone cleaning a bike chain with a cloth. ...
  • Locks. ...
  • Polycarbonate and clear polystyrene plastic. ...
  • Sensitive electronics. ...
  • Wax polishes and some wax coatings. ...
  • Anything that comes into contact with food.
Jun 26, 2023

Can you use Vaseline instead of WD-40? ›

Vaseline. It's no secret that there are many Surprising Ways To Use Vaseline In Your Home, but you can consider it a go-to idea when you are out of WD-40, too. Vaseline, or petroleum jelly, can be a huge help to add much-needed lubrication to door hinges and window sash locks.

What is the best homemade WD-40? ›

Vegetable oil with five percent acetone works. Increasing the acetone to 10 percent or up to 30 percent boosts performance. At higher concentrations, you can free the seized bolt using less than half of the force that it takes with WD-40.

Can you overwind an old clock? ›

That is an interesting question. Often, one sees clocks advertised on Ebay and elsewhere as "not running, probably overwound." The fact is, there is no way to overwind a clock.

How do you lubricate a wind up clock? ›

Apply the oil to the pivot holes in the brass backplate; usually, the holes are cupped (countersunk) to provide a 'well' that will retain the oil and in the centre you'll see the end of the white metal (steel) pivot. On an 8-day timepiece, you'll find at least four. On a striking clock they'll be more than twice that.

When should you stop winding a clock? ›

Weight driven clocks will usually run for seven days, and should be wound before the weights reach the bottom. While winding, watch the weights to make sure that they don't hit the top or the pendulum. Slow down while winding before they reach the top. Otherwise, you may overpower the winding stop.

What do you call someone who fixes old clocks? ›

Definitions of clocksmith. someone whose occupation is making or repairing clocks and watches. synonyms: clockmaker.

What is a clock repair man called? ›

Meaning of horologist in English

a person or company that makes or repairs clocks and watches: Samuel Smith was a clock and watchmaker who came from a family firm of horologists.

What is the technical name for a clockmaker? ›

People who make watches and clocks are also called horologists. They work on all types and sizes of watch and clock, from tiny wristwatches to large clocks (including public clocks). Some horologists can also be involved in making scientific timepieces, such as atomic clocks and those controlled by radio signals.

What is a synonym for horologist? ›

someone who makes or repairs watches. synonyms: horologer, watchmaker. type of: maker, shaper.

Who takes care of clocks? ›

A clockmaker's life is dedicated to taking a mechanical clock and going over every part of it with dedicated care and skill, rebuilding it once more like-new, to last yet another generation. The best clockmakers can repair any clock, even those with missing gears, broken pivots, cracked springs.

What is a clock person? ›

The Clock-People, (PROSE: Out of the Box) also spelt clock-people or clock people, (PROSE: Anachrophobia) were a race of clock-faced humanoids initially native to the Time Vortex, the remains of Faction Paradox members who had clung on to existence after the end of the War in Heaven.

What is the study of clock repair? ›

Instead, the best way to learn watch and clock repairing skills is to attend a school of horology (the art of making and repairing timepieces) that is accredited by the Research and Education Council. Visit https://www.awci.com/rec-schools-2/ for a list of these schools.

Top Articles
Latest Posts
Article information

Author: Sen. Ignacio Ratke

Last Updated:

Views: 5749

Rating: 4.6 / 5 (56 voted)

Reviews: 87% of readers found this page helpful

Author information

Name: Sen. Ignacio Ratke

Birthday: 1999-05-27

Address: Apt. 171 8116 Bailey Via, Roberthaven, GA 58289

Phone: +2585395768220

Job: Lead Liaison

Hobby: Lockpicking, LARPing, Lego building, Lapidary, Macrame, Book restoration, Bodybuilding

Introduction: My name is Sen. Ignacio Ratke, I am a adventurous, zealous, outstanding, agreeable, precious, excited, gifted person who loves writing and wants to share my knowledge and understanding with you.