Which Trade is the Toughest? (2024)

Anyone who knows me well would say that I’m a sucker for a good survey. Especially when it comes to industry surveys and statistics, I’m guilty as charged. I often spend way too much time going down rabbit holes trying to interpret the latest niche data (it could be any topic, really — from electrical safety, renewables, and technology trends to market analysis, labor shortage stats, or construction unemployment figures) in hopes it will spark a story or uncover something useful for EC&M readers. Oftentimes, this leads to a dead end, but occasionally I run across a hidden gem worthy of further investigation. In the consumer world, I admit I even tend to fall for those super gimmicky surveys that play on our extreme high and low emotions. You know the ones — the 10 worst places to live in America, the 10 most rewarding jobs young people should pursue right now, five things you must do to ensure financial success, the worst places to retire. The list goes on and on, and I am almost always guilty of clicking on the bait.

A new survey recently crossed my inbox from CraftJack that immediately caught my attention, probably due to its catchy title: “The Hardest Contractor Jobs in America.” There was no way I wasn’t clicking on that one because let’s be honest … “electrical” contractors had to be the toughest, right? That’s obvious, at least in my mind. Although the premise seemed simple and straightforward, upon further examination, I discovered the results were much more telling than the title suggested because the findings were presented not only from a contractor’s perspective, but also from a consumer’s point of view. The key here is perception. How do contractors view themselves, and what do consumers perceive about certain trades as compared to others? In November 2019, CraftJack surveyed 1,609 contractors and 652 consumers with the goal of determining what type of work was most physically grueling and what trade was the most difficult to learn and master. When it comes to which work was most physically demanding, consumers and contractors were in consensus — roofing and demolition trades topped the list. Electrical came in at 5% with contractor respondents and 3% with consumers. When asked what type of work was most difficult to master (out of 32 different trades), the two groups of respondents (the average age of which was 43 years old) were in agreement again — electrical work was the hardest to master, followed by carpentry, HVAC, and cabinets/countertops. On this question, consumers actually rated electrical contractors higher (38%) than they rated themselves (23%). Looking further into the survey results, I found it interesting to note that the answers to certain questions definitely came down to what audience was being asked. For example, certain contractors identify their own specialty as the most demanding while others downplay the difficulty factor when it comes to self-evaluation. For more details, analysis, and charts that reveal specific trends, read the original report at https://bit.ly/35Qv0bN.

This survey couldn’t help but make me think of EC&M’s recent “2019 Electrical Salary Survey and Career Report,” which was conducted in August 2019 with results published in our October issue. Available at https://bit.ly/2NouLOD, this survey not only presented the most current salary, bonus, and employment statistics, but it also took a deeper look into exactly what keeps electrical professionals up at night — another query that relied heavily on the perception factor. While work-life balance concerns, staffing issues, and the ability to stay on top of emerging standards and technologies seem to be hot button issues, see what other issues are top of mind for most of our readers.

Which Trade is the Toughest? (2024)

FAQs

What trade is the most difficult? ›

Electrical. Electrical is the most difficult trade to master according to both contractors and consumers, according to the CraftJack survey. I-TAP, an electrical training program, reports that the most physically involved parts of the job are lifting sections of electrical conduit and pulling lots of cable.

What trade is hardest on the body? ›

Consumers and contractors agreed roofing and demolition are the most physically demanding trades. And while contractors voted carpentry as the third-most physically demanding trade, it barely cracked the top ten for consumers. Of course, muscle isn't all you need on a job site.

What is the most skilled trade? ›

What is the highest-paying skilled trade? According to the BLS, the highest-paid skilled trade professionals include construction managers and elevator and escalator installers. These professionals earn median salaries of $104,900 and $102,420 per year, respectively.

Which trade is easiest to learn? ›

Plumbing is one of the high-paying trades that is easiest to learn. The only requirement for it is a high school diploma or GED. Further learning happens during on-the-job training through apprenticeships.

What trade is the most attractive? ›

It turns out that women felt the biggest spark with the electrician with 132 matches, while the scaffolder came in second with 95. The plumber and builder also had the ladies hot under the collar in joint third with 79 matches.

What is the hardest thing in trading? ›

Stop-loss orders

Stock selection, timing the market, and entry are not the hardest aspects of trading. One of the hardest things to do is figure out where to place stop-loss orders.

What trade is the most happy? ›

Happiest Trade Jobs?
  1. Electrician: Electricians enjoy a stable work environment, good pay, and opportunities for advancement. ...
  2. Plumber: Like electricians, plumbers tend to have stable job availability and good pay. ...
  3. HVAC Technician: HVAC technicians work on heating, ventilation, and air conditioning systems.
Jan 21, 2024

What trade is always in demand? ›

There are quite a few skilled trades that are set to remain in high demand over the next 10 years in these outlooks, including: Electricians. Welders. Plumbers.

What trade gives the most money? ›

Highest Paying Trades
  • Highest Paying Trades. ...
  • Construction Management – Median salary $98,890 per year. ...
  • Elevator Installers and Repairers – Average journeyman's salary is $97,900 per year. ...
  • Aircraft Mechanics – Average salary $71,115 per year. ...
  • Boilermakers – Range from $58,500 to $84,000 per year.
Apr 29, 2024

What trade is the king of all trades? ›

This presentation took place at a feast given by the King to celebrate the event, who, in a well-ordered speech, admitted having been taken in by the tailor's beautiful coat, but now felt the greatest pleasure in announcing that for all time the blacksmith should be regarded as the King of all the trades.

What is the best trade ever? ›

The best trade in history is often considered to be George Soros's shorting of the British Pound in the early 1990s, making over $1 billion. This trade, along with others by notable investors, involved highly leveraged currency exploitation.

What trade is the most physically demanding? ›

Physically demanding jobs
  1. Miner. ...
  2. Registered nurse. ...
  3. Professional athlete. ...
  4. Chiropractor. ...
  5. Personal trainer. ...
  6. Firefighter. ...
  7. Machine operator. ...
  8. Dancer.
May 31, 2024

What is the best trade job with no experience? ›

Trade jobs that you can get with no experience include apprenticeship positions and entry-level assistant jobs. Electricians, plumbers, masons, welders, machinists, and heavy equipment operators can find apprenticeships through professional organizations, vocational schools, unions, or private contractors.

What is the least strenuous trade? ›

The easiest trade jobs often depend on personal strengths and interests, but some commonly considered easier options include landscaping, painting, or general maintenance work. These roles typically require less specialized training compared to other trades.

Which trade is best for beginners? ›

Overview: Swing trading is an excellent starting point for beginners. It strikes a balance between the fast-paced day trading and long-term investing.

What is the hardest building trade? ›

Which Construction Jobs Are the Most Difficult?
  • HVAC.
  • Junk Removal.
  • Landscaping.
  • Masonry.
  • Painting and Staining.
  • Plumbing.
  • Roofing.
  • Stone and Tile.

What is the easiest trading? ›

Overview: Swing trading is an excellent starting point for beginners. It strikes a balance between the fast-paced day trading and long-term investing.

What is the most fatal trade? ›

Truck driving and construction are dangerous jobs but logging is the most hazardous
  • #8. ...
  • #7. Refuse and recyclable material collectors.
  • #6. Driver/sales workers and truck drivers.
  • #5. Aircraft pilots and flight engineers.
  • #4. Helpers, construction trades.
  • #3. Fishing and hunting workers.
  • #2. Roofers.
  • #1. Logging workers.
Apr 17, 2024

What is the hardest Labour trade? ›

The most physically demanding trades involve a lot of lifting, bending, and climbing, and are also often quite dangerous. Right off the bat, roofing is often considered to be the most dangerous of any of the construction trades.

Top Articles
Latest Posts
Article information

Author: Tish Haag

Last Updated:

Views: 5768

Rating: 4.7 / 5 (47 voted)

Reviews: 86% of readers found this page helpful

Author information

Name: Tish Haag

Birthday: 1999-11-18

Address: 30256 Tara Expressway, Kutchburgh, VT 92892-0078

Phone: +4215847628708

Job: Internal Consulting Engineer

Hobby: Roller skating, Roller skating, Kayaking, Flying, Graffiti, Ghost hunting, scrapbook

Introduction: My name is Tish Haag, I am a excited, delightful, curious, beautiful, agreeable, enchanting, fancy person who loves writing and wants to share my knowledge and understanding with you.